User manual MAXTOR ONETOUCH III FIREWIRE 400-USB 2.0 QUICK START CARD

[. . . ] After completing installation, eject the CD. Do not remove the CD until all steps of the installation are complete. 4. Step 2. Connect either a FireWire 400 or USB 2. 0 cable from the OneTouch III to the corresponding port on your computer. Refer to the User's Guide for more information. [. . . ] Open the Apple Disk Utility program and format the drive. Refer to the User's Guide for more information. *Only one interface port (FireWire 400, or USB) can be used to connect the OneTouch III to your computer. 4. Step 3. Set up the OneTouch Feature OneTouch Button 1. Push the button on the front of your drive. The Retrospect Express registration screen will appear. To register, you must be connected to the internet. 2. 3. After you complete the registration, the Retrospect Express welcome screen will appear, displaying the automated backup settings for your computer. Your installation is complete!You may now back up your computer: ­ Perform a backup at any time by pressing the OneTouch button, or ­ Allow Retrospect Express to automatically run at the next scheduled backup time. Refer to the User's Guide for more information on: ­ Restoring Your Files ­ System Rollback ­ Sync Limited Warranty Statement Please note that Maxtor reserves the right to update from time to time the warranty terms provided for new purchases of Maxtor products, and to establish the effective date of those updated warranty terms. Please refer to www. maxtor. com for the then current form of Limited Warranty Statement for Maxtor brand products. Please note that Maxtor products are distributed outside the United States and Canada through local authorized distributors and resellers ("Resellers"). These Resellers generally offer a consumer warranty, and associated warranty services, to consumer purchasers. Maxtor recommends that consumers in these jurisdictions first contact the Reseller from whom they purchased the Maxtor product for all issues with regard to product defects and the applicable product warranty. The warranty period on replacements for New Products is the remainder of the warranty on the original New Product or 90 days from the date of shipment of the replacement product, whichever is longer. To the extent that Maxtor so designates a warranty period for the Refurbished Product, Maxtor warrants to the original consumer purchaser that the Refurbished Product will be free from defects in material and workmanship for the associated Refurbished Warranty Period. Maxtor has no responsibility whatsoever with regard to any content or data on returned Products. This warranty does not cover any of the following conditions: ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ If you discover a defect in material or workmanship during the Warranty Period, and Maxtor agrees that the defect exists, Maxtor will, at its option, repair or replace the Product at no charge to you, provided it is returned during the applicable Warranty Period, with transportation charges prepaid, to the facility designated by Maxtor. The Product must be properly packaged in Maxtor or Maxtorapproved packaging, with the Return Material Authorization clearly displayed on the outside of the packaging, to obtain warranty service. Products that fail within the first 30 days after purchase will be replaced with a new Product. Maxtor may require proper proof of purchase documentation prior to issuing the replacement Product. You are responsible for saving or backing up data contained in any Product returned to Maxtor in conjunction with warranty or any other services. Maxtor shall have no responsibility for such data whatsoever and shall have no liability arising out of any damage to, or loss or disclosure of, such data. Abuse, unreasonable use, mistreatment, or neglect Unusual physical or electrical stress or power fluctuations Damage caused during installation of the Product Damage or capacity/performance/operational resetting caused by the equipment or system with which the Product is used Damage caused by modification or repair not made or authorized by Maxtor Products whose Maxtor Serial Number and/or Material Number label have been removed, torn or defaced Damage caused by use of non-Maxtor packaging Damage caused by improper or improperly used packaging Damage caused by lack of ESD protection Products that are determined to be stolen. Maxtor warrants to the original consumer purchaser ("you") that new Maxtor disk drive products ("New Products") will be free from defects in material and workmanship for the Standard Warranty Period for the relevant New Product. The Standard Warranty Period for the various New Products marketed by Maxtor and for the geographies in which they are sold is detailed on www. maxtor. com. [. . . ] In addition, should a translation of this Limited Warranty deviate from the English language version, only the English language version shall apply and be binding. MAXTOR IS NOT RESPONSIBLE OR LIABLE FOR ANY INDIRECT, UNFORESEEABLE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED AND WHETHER OR NOT MAXTOR WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING BUT NOT LIMITED TO, COSTS OF PROCUREMENT OF SUBSTITUTE GOODS, LOSS OF DATA OR PROGRAMS, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH MAXTOR PRODUCTS OR ANY OTHER DAMAGES ARISING OUT OF THE PURCHASE, USE OR PERFORMANCE OF THE PRODUCT. Maxtor is not, and cannot be, responsible for any losses or damages arising out of any loss of, or any inability to access, data as a result from the failure of a Product, and accordingly you bear this risk. The allocation of risk under this limitation of liability is reflected in the purchase price of the Product. This limitation of liability, however, will not apply to claims for death or personal injury caused by the negligence of Maxtor or its associated companies, officers, representatives or agents. PN: 20310800 © 2005 Maxtor Corporation. [. . . ]