Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAYTAG MSE 760 FARS. We hope that this MAYTAG MSE 760 FARS user guide will be useful to you.
Lastmanuals help download the user guide MAYTAG MSE 760 FARS.
Detailed instructions for use are in the User's Guide.
[. . . ] Use & Care Guide Dishwasher MAYTAG MSE 760 FARS
Quick Guide
1. Loading baskets
Remove large food particles and debris. There is no need to rinse thanks to the Super Cleaning SystemTM.
2. Dispensing dishwasher detergent
The detergent compartment has a small compartment for pre-wash and one for main wash.
3. [. . . ] Machines with refill indicator There is a refill indicator in the middle of the dispenser (see picture). If the refill indicator is totally black, there is sufficient rinse aid. However, if the indicator has a more transparent appearance, you need to top up with rinse aid (see above).
Open Refill indicator Closed
Cover for rinse aid Open by turning and lifting the cover!
20
Salt
Pour in salt
(applies to dishwashers with water softeners)
Before using a dishwasher with a water softening filter, you must fill the salt compartment with salt. Use coarse salt or special salt for dishwashers. It is best to fill with salt when you are about to do a wash, as the dishwasher needs to be rinsed out immediately after filling. Place the funnel, which is supplied with the dishwasher, into the compartment's filler hole. First pour in approximately 1 litre of water. Then fill the compartment with max 1. 5 kg salt. Wipe away excess salt so that the cover can be properly screwed into place. Run a Normal wash program so that any salt in the machine is rinsed away. When the salt runs out, the salt symbol on the display* lights up (this function is not available on all machines). Unscrew the cover and fill the compartment with salt. Water is only needed on the first occasion!Run a Normal wash program so that any salt is rinsed away. The indicator is not working If the indicator is not working, this may be because the float, which is positioned under the cover, has become stuck in salt residue. The float can be reached through the green arm located under the cover of the salt compartment. Move the float arm up and down to loosen it. Once the float has been loosened, press it down again. Models without a salt symbol in the display show green in the salt compartment cover when there is sufficient salt.
Cover for the salt compartment
*NB!
After filling, there may be a short delay before the signal light goes out.
CAUTION!
Never pour dishwasher detergent into the salt compartment. It will destroy the water softener!
21
Settings
Reprogramming
Some of the machine's functions can be reprogrammed. You get into the machine's change program using the machine's ordinary buttons as per the instructions below. The selection will be retained until the next time you reset this function. [. . . ] 32
Not all models
To prevent kinks, pull the drain hose and the connecting pipe.
Fitting fixed kick-plate
Adjusting the plinth
(Only if you have kick-plate as accessory) The dishwasher has two kick-plates (certain models). The taller one should be used if the machine is to be 850 - 870 mm high and the plinth depth can be varied between 45 - 105 mm. The lower one is to be used if the machine will be 820 - 845 mm with a plinth depth of between 50 - 105 mm. Attach the enclosed felt insulation to the kickplate (some models). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAYTAG MSE 760 FARS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAYTAG MSE 760 FARS will begin.