User manual MCCULLOCH HT60

[. . . ] HT42/420 HT45/450 HT51/510 HT60/600 FO T IN TA N ce P O R ore use feren I M bef re re ad futu Re for tain & re IO M AT R N For all customer enquiries or for replacement parts, contact:- 01325 300303 www. flymo. com eop. customer. services@electrolux. co. uk 1 Carton Contents Switch levers Handguard instruction manual blade cover/storage holder IMPORTANT !Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:Electrolux Outdoor Products Customer Service Department direct Telephone : 01325 300303 Fax : 01325 318193 Safety If not used properly this Hedgetrimmer can be dangerous!This Hedgetrimmer can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this Hedgetrimmer. [. . . ] It is important that the outer sheath is clamped correctly into the 3-pin plug. If in doubt consult your local Service Repairer or qualified electrician before the machine is used. A 13 Amp fuse must be fitted to the Mains Plug. The normal plug fuse and household fuse only protect the electrical equipment and are not a safeguard against electrocution. nondetachable mains electric cable, a conversion kit and extension cable is available from all Electrolux Outdoor Products Approved Service Centres which can be found in your local Yellow Pages. Assembly A Assembly of Handguard. Insert Handguard into slot as illustrated in figure A, ensuring that it is securely located. DO NOT USE THE PRODUCT WITHOUT FITTING THE HANDGUARD 4 Starting and Stopping Before starting your Hedgetrimmer. Form a loop in mains cable and push the loop through the hole in the handle as illustrated in Fig. To secure, position the loop over the hook and pull back as illustrated in Fig. Remove blade cover/storage holder as illustrated in Fig. There are two switch levers fitted to your Hedgetrimmer. Both switch levers need to be held in the operating position (See Fig E) for the product to start. To stop your Hedgetrimmer · Move Hedgetrimmer away from cutting area before stopping. To stop, release one of the switch levers. (Fig F) B C D E F How to Use How to Use your Hedgetrimmer 1. Inspect area to be cut before each use remove objects which can be thrown or become entangled in the cutting blades. Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position. Allow the cutting blades to reach full speed before entering the material to be cut. Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc. If blade stalls, immediately stop the Hedgetrimmer. Disconnect the Hedgetrimmer from the power source and clear jammed debris from the cutting blades. Inspect blades and repair or replace as needed. [. . . ] Bowden of Electrolux Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Certify that the product:Category. . . . . . . . Electrolux Outdoor Products Conforms to the specifications of Directive 2000/14/EEC I, the undersigned M. Bowden of Electrolux Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. [. . . ]