User manual MCINTOSH C29 BROCHURE

[. . . ] A current sensing relay connected to the turntable AC power outlets is controlled by the turntable power switch. The relay, in turn, controls the AC power to the remainder of the system. STEPPED TONE CONTROLS INDEPENDENT IN EACH CHANNEL Ideal volume control tracking accuracy and noise free performance are two of the considerable benefits of the McIntosh Precision Step Attenuator. It is a thirty-two step, 70 dB range control with unheard of tracking accuracy within 1 dB. [. . . ] Simply push a button to listen to either one - - or record from any selected source on either or both - - or - - copy from one tape recorder to another while listening to an entirely different program. You can instantaneously monitor either tape recorder. 8. STEREO MICROPHONE INPUT MAKES RECORDING EASY Any unwanted noise (hiss, rumble, fry, etc. ) can be reduced with the filter switch. It allows the reduction of low frequency noise and high frequency noises (below 50 Hz and above 7 kHz). 11. CONTROL REMOTE LOUDSPEAKERS FROM YOUR PREAMPLIFIER Microphones in stereo may be used with the C 29. By tuning the input selector to MIC the Through a unique McIntosh design, you have ON/OFF control of two separate sets of stereo speakers when used with an accessory switching relay (the McIntosh SCR 2). C 29 PERFORMANCE LIMITS PERFORMANCE LIMITS Performance limits are the maximum deviation from perfection permitted for a McIntosh instrument. We promise you that when you purchase a new C 29 from a McIntosh Franchised dealer it will be capable of performance at or exceeding these limits or you can return the unit and get your money back. McIntosh is the only manufacturer that makes this statement. BALANCE CONTROL Natural balance at center position, attenuation of left or right channel by rotating control PRECISE TRACKING VOLUME CONTROL A precision step volume control with left to right tracking accuracy within 1 dB through its entire range. SIX SOURCE INPUT SELECTOR Auxiliary 1 and 2, TUNER, PHono 1 and 2, MICrophone MODE SELECTOR Seven positions: Left channel only to both speakers, Right channel only to both speakers, Stereo Reverse, Stereo, Mono, L + R to left speaker only, and L + R to right speaker only TAPE MONITOR SWITCHES Two pushbutton switches. Either of two tape recorders can be monitored by selecting the TAPE 1 pushbutton or TAPE 2 pushbutton. They are mechanically interlocked to accept only one pushbutton at the IN position at one time. TAPE COPY SWITCHES Two pushbutton switches. Either of two tape recorders can be connected to copy from tape recorder 1 to tape recorder 2 or vice versa. They are mechanically interlocked to accept only one pushbutton at the IN position at one time. LF - HF FILTERS Reduce unwanted high frequency noise (above 7 kHz) and low frequency rumble etc. [. . . ] Chassis measures 14 3/4 inches wide (37. 5 cm) by 4 13/16 inches high (12. 2 cm) by 13 inches deep (33. 0 cm), including PANLOC shelf and back panel connectors. Knob clearance required is 1 1/4 inches (3. 2 cm) in front of the mounting panel. FINISH Front panel is anpdized gold and black with special gold/teal nomenclature illumination. [. . . ]