User manual MCINTOSH CS100 IN-CEILING LOUDSPEAKER

[. . . ] Ceiling Loudspeaker System CS100 Installation Guide McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL. Thank You Your decision to own this McIntosh CS100 Ceiling Loudspeaker System ranks you at the very top among discriminating music listeners. You now have "The Best. " The McIntosh dedication to "Quality, " is assurance that you will receive many years of musical enjoyment from this unit. Please take a short time to read the information in this manual. [. . . ] Patent number 7171013 3 Dimensions The following dimensions can assist in determining the best location for the CS100 Loudspeaker System. 31. 60cm 26. 35cm 12-7/16" 10-3/8" 14. 13cm 5-9/16" 15. 24cm 6" 26. 99cm 10-5/8" For use in a Music System For optimum results from a music system, place the Loudspeakers on either side of the listening area and rotate the Loudspeaker's baffle toward the listening area. Use multiple pairs for optimum coverage in large rooms. Figure 2 Installation Overview The CS100 Ceiling Loudspeaker System is designed to mount into the ceiling of a typical room. Before choosing the location in the ceiling for the CS100, it is important to read "Location in the Room" for the best possible performance. When mounting the Ceiling Loudspeaker System to a building structure, it is important to follow all of the local building/construction codes. Make sure the ceiling structural members can support a weight of 45 pounds (five times the net weight) for each CS100. The ceiling thickness should be a minimum of 3/8 inch (0. 95cm) for secure mounting of the CS100. It is recommended that the Professionals at your McIntosh Dealer, who are skilled in all aspects of installation and operation, install the CS100 Loudspeaker System and any associated audio equipment. Location in the Room Do to the nature of installing the CS100 Ceiling Loudspeaker System, it is important to consider any possible future changes likely to be made to the room, like furniture placement, before deciding on the locations for the CS100s. The tweeter and midrange baffle of the Loudspeaker have been angled to deliver accurate onaxis response to the listening position. Figure 1 The baffle must be properly positioned to deliver the best sound. Refer to the dispersion pattern in figure 1. 4 For use in a Home Theater When using the CS100 as a front or main Loudspeaker keep the Loudspeakers as close to the front wall as possible. Ideally, the center Loudspeaker should be located on the same plane as the television or projection screen. The left and right Loudspeakers should be positioned no farther in Figure 3 than the outside of the screen or monitor. When using the CS100 as a surround Loudspeaker, the CS100 can be used as either a direct or diffuse surround Loudspeaker. For direct operation, direct the Loudspeaker Figure 4 baffle toward the listening area as illustrated in figure 3. For a diffused surround sound operation, direct the Loudspeaker baffle toward a back wall or corner as illustrated in figure 4. Installation Painting the Loudspeaker The CS100 Ceiling Loudspeaker System is primed and may be painted before or after installation. Insert the supplied paint shield into the frame of the Loudspeaker. Paint the frame with light coats, to help prevent excessive paint buildup and "runs" on the frame. After the paint has dried, use the finger pulls to remove the paint shield. Carefully remove the cloth from the inside of the grille. Paint the grille with very light coats, to help prevent paint from filling the holes in the grille. After the paint is dry, reinstall the previously removed grille cloth. Installing the Loudspeaker Follow the instructions below for installation using appropriate tools. If the optional RK100 Rough-In Kit Bracket has been previously installed, go directly to step 6: 1. [. . . ] In any such event, this Warranty is void, as provided in the preceding paragraph, and any warranties, service agreements, or other representations of any kind which you may have received from your seller are binding solely upon your seller and not upon McIntosh. If you have been misled in any way on this subject, you should make immediate inquiry of your seller. Geographical Limitations This Warranty has been included with a McIntosh Speaker that is designed, intended to be sold and used only within the United States and Canada. Accordingly, this Warranty only applies to Speakers which are purchased in the United States or Canada, and only applies while such Speakers are used in the United States or Canada. [. . . ]