User manual MCINTOSH MCD7007

[. . . ] IMPORTANT SAFETY INSTRUCTIONS THESE INSTRUCTIONS ARE TO PROTECT YOU AND THE MclNTOSH INSTRUMENT. BE SURE TO FAMILIARIZE YOURSELF WITH THEM. 1. Read all instructions - Read the safety and operating instructions before operating the instrument. 2. Retain Instructions - Retain the safety and operating instructions for future reference. 3. Heed warnings - Adhere to warnings and operating instructions. [. . . ] The entire range of volume adjustment is 66 dB in 2 dB increments. Left and right tracking is controlled to a fraction of a dB. Because there aren't any moving parts, the volume adjustment cannot generate noise or misalignment. The VOLUME indicator in the message center is a 10 segment display. As volume is increased, more segments are lighted to indicate relative volume. The first 10 seconds of each track will be played when the SCAN button is used to initiate play. As each track is previewed the SCAN indicator, the TRACK number and the eLAPsed TIME is displayed. When the tracks have been previewed, the SCAN indicator turns off, the laser pick-up returns to the beginning of the first track. The total number of tracks and the total time will be displayed in the message center. If, before you have previewed all tracks, you decide to listen to all of the remaining tracks on the disc, touch PLAY. The SCAN indicator will go off and the remaining tracks will play in their entirety, beginning with the track indicated in the message center. Any track can be entered in the memory for later playing while using SCAN. To enter a track, touch STORE while the track is playing and the TRACK will be inserted in the memory. The player will preview the next track and the indicator for that track will be displayed. When all tracks have been previewed, SCAN will go off. To listen to the stored program, touch PLAY And the disc will play the stored tracks in the sequence selected. OPERATION 9 MESSAGE CENTER DISPLAY-5. Disc symbol flashes during loading and starting Play is in continuous loop between selected points A (start) and B (end). PAUSE function is active. REPEAT function is active. Track or index symbols flash during programming. Minutes or Seconds symbols flash during programming. Indicates REMaining Total Time or eLAPsed Track Time. Indicates Relative volume level Indicates program has been stored. Encoded program is being displayed. The display in the message center presents many different types of information. As soon as the POWER button is touched to turn the player on, the message center shows a series of zeros in TRACK, INDEX and TIME. The eLAPsed time indicator and the VOLUME bar are also lighted. The LOAD button opens and closes the disc drawer. Once opened, place a disc in the drawer label side up. [. . . ] · The player is not horizontal. · The transport screws have not been removed. · The disc is not inserted label up or there isn't a disc in the drawer and you have missed the ERROR DISC sign. Clean the disc, or use another, 14 HELPFUL HINTS 7. · The disc is dirty or badly scratched. [. . . ]