User manual MCINTOSH MCD7009

[. . . ] MCD7009 COMPACT DISC PLAYER IMPORTANT SAFETY INSTRUCTIONS THESE INSTRUCTIONS ARE TO PROTECT YOU AND THE MclNTOSH INSTRUMENT. BE SURE TO FAMILIARIZE YOURSELF WITH THEM 1. 4. Read all instructions - Read the safety and operating instructions before operating the instrument. Retain Instructions - Retain the safety and operating instructions for future reference. [. . . ] Press the POWER pushbutton The front panel teal pushbutton nomenclature will turn on. The Red LED above the pushbutton starts to flash and the disc tray will slide out. The front panel display will indicate "OPEN" Place a disc within the guides, on the tray with the label facing up. There is a recessed area on the disc tray to accommodate 3 inch (7. 6cm) discs. The disc tray will close and the front panel display will indicate "CLOS". The Red LED above the pushbutton will turn on, to indicate a disc is loaded. This LED will stay on as long as a disc is in the tray or playing. HOW TO OPERATE The above information is displayed. Several seconds later, the MCD7009 enters the standby mode. PRESS THE PLAY BUTTON Disc playback starts from the first track. CAUTION Do not force the tray by hand during opening and closing operations. Do not leave the disc tray open when the MCD7009 is not in use to prevent dirt and dust from entering the mechanism. EVEN IF THE DISC TRAY IS OPEN DIRECT ACCESS PLAY: By pressing the numeric buttons corresponding to the required track, the tray will close and play starts from the specified track directly, without your having to press the play button. Example 1 To play the 5th track: Press Example 2 To play the 21st track: Press twice, then WHEN THE PLAY BUTTON IS PRESSED The disc tray will close and playback starts from the first track. WHEN THE PAUSE BUTTON IS PRESSED The tray will close and the MCD7009 will enter the pause mode at the beginning of the first track. The Red LED above the PAUSE pushbutton will turn on to indicate the pause mode is in effect. TO STOP PLAYBACK Press the stop button. The MCD7009 enters the stop mode. 13 HOW TO OPERATE TO UNLOAD THE DISC Press the open/close button on the front panel; playback stops and the disc tray will slide out, and all functions are reset to their initial settings. TO TEMPORARILY SUSPEND PLAYBACK (PAUSE MODE) Press the pause button. Playback stops at the current position and the Red LED above the PAUSE pushbutton turns on. To resume playback from the same position, press the play button or pause button again. The SINGLE indicator will light in the display. Press the numeric buttons corresponding to the required track. A single track will be played back, after which the MCD7009 will enter the stop mode. [. . . ] In normal playback mode, if a track with a number higher than 20 is being played, the remaining time will not be displayed in the time counter even when the time button is pressed. If tracks with numbers higher than 20 are included in the program, the remaining time and total remaining time may not be displayed in the time counter depending on the track being played. AUTO SPACING When this function is activated, an interval of approx. 4 seconds will be inserted between tracks automatically, so they are played back with a fixed spacing. To activate this, press the auto space button so that the AUTO SPACE indicator lights in the display. [. . . ]