User manual MCINTOSH MDA700

[. . . ] 2 Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Read all the safety and operating instructions, contained in this owners manual, before operating this equipment. Retain this owners manual for future reference about safety and operating instructions. Adhere to all warnings and operating instructions. Follow all operating and use instructions. Warning: To reduce risk of fire or electrical shock, do not expose this equipment to rain or moisture. This unit is capable of producing high sound pressure levels. Continued exposure to high sound pressure levels can cause permanent hearing impairment or loss. User caution is advised and ear protection is recommended when playing at high volumes. Caution: to prevent electrical shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. 3 Safety Instructions cont, Introduction and Performance Features 17. Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock. Clean the instrument by dusting with a dry cloth. Unplug this equipment from the wall outlet and clean the panel with a cloth moistened with a window cleaner. Do not use liquid cleaners or aerosol cleaners. Do not permit objects of any kind to be pushed and/or fall into the equipment through enclosure openings. Never spill liquids into the equipment through enclosure openings. Unplug the power cord from the AC power outlet when left unused for a long period of time. Unplug this equipment from the wall outlet and refer servicing to a qualified service personnel under the following conditions: A. The AC power cord or the plug has been damaged. Objects have fallen, or liquid has been spilled into the equipment. The equipment has been exposed to rain or water. The equipment does not operate normally by following the operating instructions contained within this owners manual. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. [. . . ] The most often used Sampling Frequencies are 32kHZ for Satellite, 44. 1kHZ for CD and 48kHZ for DVD and DAT. 9 Specifications Specifications Frequency Response 4-22, 000Hz +/-0. 3dB (Sampling frequency:48KHz) 4-20, 000Hz +/-0. 3dB (Sampling frequency:44. 1KHz) 4-15, 000Hz +/-0. 3dB (Sampling frequency:32KHz) Total Harmonic Distortion 0. 0015% (1KHz) Signal To Noise Ratio 110dB (A-weighted) Dynamic Range Better than 100dB (1KHz) Channel Separation Better than 110dB (1KHz) Sampling Frequency 48KHz, 44. 1KHz or 32KHz D/A Conversion (4) 20-bit converter/channel Digital Filter 8-times oversampling 20-bit digital filter Analog Filter 3rd order GIC Butterworth Filter Maximum Voltage Output 2. 2V RMS (Unbalanced and Balanced) Inputs 1 and 2:Optical 3 and 4:Coaxial 0. 5V p-p/75 ohm Output Impedance 220 ohms, Balanced and Unbalanced Power Requirements 100 Volts, 50/60Hz at 20 watts 110 Volts, 50/60Hz at 20 watts 120 Volts, 50/60Hz at 20 watts 220 Volts, 50/60Hz at 20 watts 230 Volts, 50/60Hz at 20 watts 240 Volts, 50/60Hz at 20 watts NOTE: Refer to the rear panel of the MDA700 for the correct voltage. Dimensions 17-1/2 inches (44. 5cm) wide, 3-5/8 inches (9. 2cm) high, 15 inches (38. 1cm) deep, including clearance for connectors. Allow 3/4 inches (1. 9cm) in front of the mounting panel for clearance. 10 Packing Instructions Packing Instructions In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below. It is very important that the four plastic feet are attached to the bottom of the equipment. This will ensure the proper equipment location on the bottom pad. [. . . ]