User manual MCINTOSH MVP831

[. . . ] OWNERS MANUAL MVP831 DVD / Video CD / CD Player Manufactured under license from Dolby Laboratories, Dolby, Pro Logic and the doubleD symbol are registered trademark of Dolby Laboratories. This product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. [. . . ] Press the SETUP pushbutton to access the Initial Setup Menu. Press pushbutton Number 3 to access the On Screen Menu Language screen. English will be indicated as the factory default setting. After a selection is made, the initial setup menu will reappear. If all setup adjustments are complete, press pushbutton Number 0 to exit the Initial Setup Menu. Select the language for these Menus. 1 English 2 French 3 Spanish 0 Exit Figure 11 16 SETUP How to Set On-Screen Messages and FL Display How to Set On-Screen Messages This allows you to turn On Screen Messages, that appear in the upper right corner of the screen, such as PLAY or STOP On or Off. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. How to Set FL Display The MVP831 front panel display, just below the disc tray, can be adjusted to be Bright or Dim. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. The other front panel nomenclature is fixed and will not affected by the Display adjustment operation. 1. Press the SETUP pushbutton to access the Initial Setup Menu. Press pushbutton Number 4 to select the On-Screen Messages Menu. ON will be indicated as the factory default setting. After a selection is made, the Initial Setup Menu will reappear. If all setup adjustments are complete, press pushbutton Number 0 to exit the Initial Setup Menu. 1. Press the SETUP pushbutton to access the initial setup menu. Press pushbutton Number 5 to select the FL Display (Front panel Display Brightness Menu). Bright will be indicated, which is the factory default setting. After a selection is made, the initial setup menu will reappear. If all setup adjustments are complete, press pushbutton Number 0 to exit the Initial Setup Menu. On-Screen Messages 1 On 2 Off FL Display 1 Bright 2 Dim 0 Exit 0 Exit Figure 12 Figure 13 17 SETUP How to Set TV Aspect Ratio How to Set TV Aspect Ratio This feature allows you to configure the player to provide the correct video mode to match your Monitor/TV. The width to height screen dimension of a 4:3 Aspect Ratio Monitor/TV match the screen size requirements of videos as well as conventional TV signals. A Monitor/TV with a 16:9 Aspect Ratio will fill its screen with an entire Wide Screen video. Once the TV Aspect Ratio is set, it should not be changed. Make changes only if a Monitor/TV with a different Aspect Ratio is used. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. 1. Press the SETUP pushbutton to access the initial setup menu. [. . . ] Press the SUBTITLE Pushbutton and the Subtitle Icon will appear. The current Subtitle language and whether it is turned on or off will be indicated. Press an Up or Down ARROW pushbutton to scroll through the available Subtitle languages. When the preferred language is displayed, it will automatically be selected. [. . . ]