User manual MCINTOSH MVP841

[. . . ] Owners Manual MVP841 DVD / Video CD / CD Player Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories. © 1992-1977 Dolby Laboratories, Inc. This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] Press SELECT again and the initial setup menu will reappear. Press push-button Number 2 to access the Ratings Menu. Enter the previously assigned 4-digit password and then press SELECT. Then press the Number for the new desired Ratings level. Press push-button Number 2 to access the Ratings Menu. Enter the previously assigned 4-digit password and then press SELECT. Press 4 to Temporarily Unlock the Player, which is effective only for the current disc in the player. Press SELECT to exit to the initial setup menu. After all setup adjustments are complete, press push-button Number 0 to exit the Initial Setup Menu. 18 Figure 11 After a selection is made, the initial setup menu will reappear. If all setup adjustments are complete, press push-button Number 0 to exit the Initial Setup Menu. How to Set On-Screen Messages This allows you to turn On Screen Messages, that appear in the upper right corner of the screen, such as PLAY or STOP On or Off. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. 1. Press the SETUP push-button to access the Initial Setup Menu. Change On-Screen Messages Press push-button Number 1 to select the On-Screen Messages Menu. See figure 12a. SETUP, cont How to Set FL Display 1. The MVP841 front panel display, just below the disc tray, can be adjusted to be Bright or Dim. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. The other front panel nomenclature is fixed and will not affected by the Display adjustment operation. 1. Press the SETUP push-button to access the initial setup menu. Press push-button Number 5 to select the FL Display (Front panel Display Brightness Menu). Bright will be indicated, which is the factory default setting. Press 2 to select Dim. Figure 12a Change Color and Position Press push-button Number 2 to select the Color and Position Menu. Press 2 to select Violet, top of screen. Press 4 to select Blue, middle of screen. Press 5 to select Violet, middle of screen. [. . . ] The front panel ANGLE Indicator will light to indicate that the disc being played has a multiple angle feature. The ANGLE Icon will appear indicating the current Angle, No. Press a Number push-button to select a different angle. If no change occurs when a Number is entered, this indicates that the disc has only a single video angle encoded. [. . . ]