User manual MCINTOSH MX 112 EARLIER

[. . . ] The Setup feature is the inclusion of the PAUSE /E Push-button use on the supplied Remote Control for exiting Setup Menus. MENU: MAIN SYSTEM SETUP SPEAKER SIZE SPEAKER TIME DELAY SPEAKER LEVEL INPUT SETUP SURROUND MODE SETUP ZONE B SETUP ADVANCED EXIT How to Change the Input Setup Before proceeding with Digital Lock and Surround Mode adjustments below, refer to pages 22 thru 30 in the Owner's Manual if you have not already done so. Press and hold the Front Panel SETUP Push-button approximately three seconds to enter the Setup Mode. The word SETUP will appear on the MX134 Front Panel Display and the MAIN SYSTEM SETUP Menu will appear on the Figure A1 Monitor/TV screen. [. . . ] The word SETUP will appear on the MX134 Front Panel Display and the MAIN SYSTEM SETUP Menu will appear on the Figure A1 Monitor/TV screen. Refer to figures A2 and A3. Figure A3 MENU: INPUT SETUP SOURCE INPUT 2 TITLE CD1 DIGITAL INPUT OPT A LK SURR MODE LAST VIDEO POWER ON COMPONENT VIDEO NO VIDEO CONVERTER IN OFF MAIN MENU Figure A2 2. Using the Up or Down directional Push-buttons on the Remote Control, select Input Setup on the OnScreen Menu, followed by the SELECT Push-button. Using the Up or Down directional Push-buttons, select SOURCE INPUT from the On-Screen Menu, followed by pressing the Left or Right directional Push-buttons to select Input Number 2 (CD1). Refer to figure A4. Note: The very first time the INPUT SETUP is accessed, the default settings will be indicated. Digital Lock By default, the MX134 will automatically switch to and lock onto a Digital Signal. It will stay locked in Digital Mode even when there is a momentary interruption of the Digital Signal. The Digital Lock Mode can be switched OFF to allow for 'on the fly' Digital/Analog Selection. Using the Up or Down directional Push-buttons, select SURR MODE from the OnScreen Menu, followed by pressing the Left or Right directional Push-buttons to select the MUSIC 3 Surround Mode instead of the default LAST. Continue next to the VIDEO POWER of the SOURCE INPUT Menu on page 32 of the Owner's Manual. If you do not wish to perform any other SOURCE INPUT Settings at this time, select the MAIN MENU. The MAIN SYSTEM SETUP Menu will reappear on the Monitor/TV screen and proceed to the next step. Select EXIT from the MAIN SYSTEM SETUP Menu. If you are satisfied with the changes that have been made, select YES to save those changes or NO not to save them. The Figure A5 MENU: INPUT SETUP SOURCE INPUT 2 TITLE CD1 DIGITAL INPUT OPT A LK SURR MODE MUSIC3 VIDEO POWER ON COMPONENT VIDEO NO VIDEO CONVERTER IN OFF MAIN MENU Figure A6 ADJUSTMENTS HAVE BEEN MADE DO YOU WANT TO SAVE THEM? [. . . ] Select EXIT from the MAIN SYSTEM SETUP Menu. If you are satisfied with the changes that have been made, select YES to save those changes or NO not to save them. The Figure A5 MENU: INPUT SETUP SOURCE INPUT 2 TITLE CD1 DIGITAL INPUT OPT A LK SURR MODE MUSIC3 VIDEO POWER ON COMPONENT VIDEO NO VIDEO CONVERTER IN OFF MAIN MENU Figure A6 ADJUSTMENTS HAVE BEEN MADE DO YOU WANT TO SAVE THEM? [. . . ]