User manual MCINTOSH MX 134 SETUP

[. . . ] Setup This McIntosh MX134 incorporates two additional Operational and one Setup Enhancement Features. The Digital Lock Circuit can be set On or Off for each of the six Digital Audio Inputs on an input by input basis. [. . . ] To switch OFF the Digital Lock, perform the following steps. Refer to figure A4. Note: The Digital Lock option is now part of the Source Input Menu, instead of the Advanced Settings Menu as illustrated in the Owner's Manual. Figure A4 MX134 Addendum McIntosh Part No. Using the Up or Down directional Push-buttons, select DIGITAL INPUT from the On-Screen Menu, followed by pressing the Left or Right directional Push-buttons to select OPT A instead of the default OPT A LK. Continue next to the SURR MODE of the SOURCE INPUT Menu. If you do not wish to perform any other SOURCE INPUT Settings at this time, select the MAIN MENU. The MAIN SYSTEM SETUP Menu will reappear on the Monitor/TV screen and proceed to the next step. Select EXIT from the MAIN SYSTEM SETUP Menu. If you are satisfied with the changes that have been made, select YES to save those changes or NO not to save them. The MX134 will then return to normal operation. Surround Mode Default By default, the MX134 will remember the last Surround Mode Setting for each input. [. . . ] Pause /E Push-button Exiting from a Setup Menu can also be performed by pressing the PAUSE /E Push-button on the Remote Control instead of selecting MAIN MENU or EXIT by using the Up or Down directional Push-buttons and the SELECT Push-buttons. Refer to figure A5. 2 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 [. . . ]