User manual MCINTOSH MX134

[. . . ] Owner's Manual MX134 A/V Control Center Manufactured under license from Dolby Laboratories, "Dolby", "Pro Logic II", "Pro Logic" and the double-D symbol are registered trademarks of Dolby Laboratories. Surround EX is a jointly developed technology of THX and Dolby Labs, Inc. , and is a trademark of Dolby. Lucasfilm, THX, THX ULTRA, the THX logo, Re-Equalization, Re-EQ, Timbre Matching, Decorrelation, Bass Management, and Loudspeaker Position Time Synchronization are registered trademarks of Lucasfilm, Ltd and manufactured under license from Lucasfilm Ltd. "DTS", "DTS ES", "digital surround", and "coherent acoustics" are registered trademark of DTS Technology, LLC. [. . . ] The Loudspeaker level cycling mode can be repeated as often as necessary. Press the SELECT Push-button to switch Off the Automatic Loudspeaker Level Switching Mode. If you do not wish to perform INPUT SETUP Adjustments at this time, select MAIN MENU from the menu. The MAIN SYSTEM SETUP Menu will reappear on the Monitor/TV screen and proceed to the next step. Select EXIT from the MAIN SYSTEM SETUP Menu. If you are satisfied with the changes that you may have made, select YES to save those changes or NO not to save them. The MX134 will then return to normal operation. Refer to figure 7 on page 23. MENU: SPEAKER LEVEL AUTOMATIC {OFF} MANUAL {ON} LEFT FRONT CENTER RIGHT FRONT RIGHT SURROUND RIGHT BACK SURR LEFT BACK SURR LEFT SURROUND SUBWOOFER MAIN MENU 0 0 0 0 0 0 0 0 Figure 13 L e f t F ron t C e n te r R ig h t F ro n t R ig h t S u rrou n d R ig h t B a c k S urr oun d L e f t B a c k S urro un d L e f t S urr oun d S ubw oof e r 0d B 0d B 0d B 0d B 0d B 0d B 0d B 0d B 29 How to Change the Input Setup The MX134 has eleven Analog Audio Inputs numbered 1 through 11, six Digital Audio Inputs lettered A through F and two Component Video Inputs numbered 1 and 2. These inputs already have assigned titles and associations that will allow for immediate hookup, operation and enjoyment. If these starting assignments and associations do not match up with components in your system, they may be reassigned from the default settings. The following example will illustrate how to rename the AUX Input to DVD2 and assign it a Digital Input. When the Zone A or B Input Selector is rotated to select what was originally the AUX Input, DVD2 will now appear on the Front Panel Alphanumeric Display. The Video Power Control, Video Converter and Component Video can also be set for each Input. Notes: 1. The Source Input Number 0 will always be assigned to the Tuner Input and can not be reassigned. Unused Inputs may be switched Off so that they will not appear when rotating through the input source choices using the Zone A or Zone B Input Selector and also will not be available when using the Remote Control or Keypad. Each Analog Audio/Video Input must have a unique title (type and number) assigned to it. Multiple Inputs of the same type must be assigned consecutively. Example, there can not be a DVD3 Input without first having DVD1 and DVD2 inputs. MENU: INPUT SETUP SOURCE INPUT TITLE DIGITAL INPUT VIDEO POWER COMPONENT VIDEO VIDEO CONVERTER IN MAIN MENU 1 AUX NONE ON NO OFF Figure 14 1. Press and hold the Front Panel SETUP Push-button approximately three seconds to enter the Setup Mode. The word SETUP will appear on the MX134 Front Panel Display and the MAIN SYSTEM SETUP Menu will appear on the Monitor/TV screen. Using the Up or Down directional push-buttons on the Remote Control, select Input Setup on the OnScreen Menu, followed by the SELECT Push-button. Using the Up or Down directional push-buttons, select SOURCE INPUT from the On-Screen Menu, followed by pressing the Left or Right directional push-buttons to select Input Number 1. Note: The very first time the INPUT SETUP is accessed, the default settings will be indicated. Analog Audio/Video Input Title 4. [. . . ] The new station will automatically replace the previously assigned station. 4. Press and release the Front Panel ENTER Push-button a second time to store the Preset into memory. The just entered Station Preset Selection will be assigned Preset Number 1 which is displayed on the far right side of the Front Panel Alphanumeric. Refer to figures 81 and 82. Figure 83 4. [. . . ]