User manual MCINTOSH MXA60

[. . . ] McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www. mcintoshlabs. com MXA60 60th Anniversary Integrated Audio System Owner's Manual The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION Invisible Laser Radiation when open. DO NOT stare into the beam or view directly with optical instruments. Use of controls or adjustments or performance of procedures other than those specified in the Owners Manual may result in Hazardous Radiation Exposure. NO USER-SERVICEABLE PARTS INSIDE. [. . . ] The Front Panel upper Display will revert back to its normal display. Refer to figure 3. Default Settings The Default Settings Chart below indicates the Function Name, Default Setting and the Page Number for additional information. In order to change the Source Name and Level for Input 1 and Input 2, either Input needs be selected before entering the Setup Mode. SOURCE: CD TUBE WARMUP Figure 1 SOURCE: TUNER FM 30% Figure 2 91. 5 MHz WWWW-FM Figure 3 ST ¦ SETUP: VERSION MXA60 V1. 00 Figure 4 22 Figure 5 Setup Firmware Version The MXA60 functionality is controlled by internal software that is know as Firmware. The Version of the Firmware in the MXA60 can be identified at any time by utilizing the Setup Mode. Press and hold in the INPUT/TRIM Control (inner knob) until the Setup Mode is active. The Front Panel Information Display will indicate "SETUP: VERSION MXA60 V_ . The number after the character "V" is the Firmware number. Proceed to "Source Name1" or exit from the Setup Mode, by pressing the INPUT/TRIM Control (inner knob). The Front Panel Information Display will revert back to its normal display. character "S" appears instead of the "I". Rotate the INPUT/TRIM Control (inner knob) to select Tuner FM and tune to a station. Adjust the VOLUME Control to the desired listening level. Rotate the INPUT/TRIM Control (inner knob) to select Input 1 (Music Server) and note the volume level. Press and hold in the INPUT/TRIM Control (inner knob) until the Setup Mode is active. Rotate the INPUT/TRIM Control (inner knob) to select "LEVEL: 0dB. Refer to figure 9. SETUP: SOURCE NAME INPUT1: -> SNPUT1 Figure 7 6. Rotate the TUNE/TRIM Control (outer knob) to select the "N" of the title "Input 1". Slowly rotate the VOLUME Control until the character "E" appears instead of the "N". Repeat the method used in steps 6 and 7 until the word "Input 1" is replaced with the word "Server". Refer to figure 8. Source Name1 The MXA60 allows for renaming (up to eight characters long) of the two External Inputs to match the components in your system. In the following example Input 1 will be renamed Server. Follow the steps below for renaming Input 1: 1. Rotate the INPUT/TRIM Control (inner knob) to select Input 1. [. . . ] The 9 BACK track function will begin TUN Push-button on the Remote Control to start Playback. After all the tracks have been played the MXA60 will stop. 02:36 3. To cancel the Random Playback Mode, press the < / STOP/OPEN Push-button on the MXA60 Front Panel or the < /TUN q Push-button on the Remote Control, then press the RANDOM Push-button. MP3/WMA Disc Playback The MXA60 has the ability of playing back MP3 and WMA encoded discs. [. . . ]