User manual MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPE PART 1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPE. We hope that this MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPE user guide will be useful to you.
Lastmanuals help download the user guide MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPE.
Manual abstract: user guide MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPEPART 1
Detailed instructions for use are in the User's Guide.
[. . . ] The Spreader Bar should be rotated about 60° from its shipping position until the 3 arms of the Spreader Bar are lined up with the 3 tripod legs. Then, turn the Threaded Rod in the center of the Field Tripod so that about 1 1/2" of its length protrudes up through the center Tripod Head. Underneath the Head of the Field Tripod is a hex lock-nut, which should be tightened to fix the position of the Threaded Rod. [. . . ] Firm tightening of the Tension Knob is sufficient to result in rigid position of the tripod legs. It is not necessary to use extreme force in tightening this knob.
B. Equatorial Wedge
The Equatorial Wedge permits the Model 2045 SCHMIDT-CASSEGRAIN TELESCOPE SCHMIDT-CASSEGRAIN TELESCOPE to be used in astronomical or "equatorial" mode without the 3 Table Tripod Legs. The wedge fits on the Field Tripod, described above, and accepts the base of the Model 2045 SCHMIDT-CASSEGRAIN TELESCOPE SCHMIDT-CASSEGRAIN TELESCOPE fork mount. Note: The Meade Equatorial Wedge is designed solely for use in conjunction with the Meade Field Tripod. The wedge should never be used without the Field Tripod, e. g. by placing the wedge alone on a table top and then mounting the telescope on the wedge. The Model 2045 SCHMIDT-CASSEGRAIN TELESCOPE SCHMIDT-CASSEGRAIN TELESCOPE telescope, placed onto the Equatorial Wedge alone, without the Field Tripod attached to the wedge, may become seriously imbalanced to the point where the telescope may actually tip over. Mounting the Telescope Onto the Equatorial Wedge
1. Check that the knobs at the side of the wedge are firmly tightened before placing the telescope onto the wedge. Three knobs are supplied with the Equatorial Wedge for mounting the drive base of the telescope to the tilt-plate. Thread one of the knobs into the hole on the curved underside of the drive base. This knob should be threaded about three full turns, not fully into the hole. Grasp the 2 fork arms of the telescope firmly, place the telescope onto the tilt-plate of the wedge by sliding the knob into the slot at the top of the curved end of the wedge tilt-plate. Insert the 2 remaining knobs through the underside of the tilt-plate. Tighten down all 3 knobs to a firm feel. [. . . ] Insert the 2 remaining knobs through the underside of the tilt-plate. Tighten down all 3 knobs to a firm feel. Extreme force is not necessary in this regard. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MEADE 2045 SCHMIDT-CASSEGRAIN TELESCOPE will begin.
