User manual MEDION CD PORTY MD 40983

[. . . ] Improper connection of the device may damage the device or peripheral equipment. Portable CD Player MD 40983 GENERAL Keep these operating instructions always at hand. Heed all warnings labelled onto the device and specified in the operating instructions. Do not allow children to play with electrical equipment without supervision. AMBIENT CONDITIONS Protect the device against humidity and heat. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PROGRAM programming the playback sequence of tracks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ESP-function (anti shock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BBS bass amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 HOLD key lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 CD-Porty_MD40983_UK. FH11 Wed May 19 11:40:15 2004 Seite 4 O P E R AT I N G M O D E S BATTERY OPERATION Insert two 1. 5 V mignon cells R6/LR6 (not included in the scope of delivery) in the battery compartment (see page 4). Your CD Player is now ready for operation. OPERATION WITH RECHARGEABLE NiCd BATTERIES Insert 2 nickel-cadmium batteries (not included in scope of delivery), observing the correct polarity. Pay attention to the notes on page 4! CHARGING OF NiCd BATTERIES IN UNIT To charge the batteries, exclusively use the included mains adapter. Connect the mains adapter to the CD player and an easily accessible mains socket 230 V ~ 50 Hz. The charging operation starts and the red charging LED at the side of the unit lights during the charging. After some 15 hours the rechargeable batteries are fully charged. After the charging process, disconnect the mains adapter from the mains socket and the DC plug from the input jack. BATTERY INDICATOR If the indicator starts flashing, the capacity of the batteries or rechargeable batteries will be exhausted soon. OPERATION VIA MAINS ADAPTER Connect the mains adapter to the CD player and an easily accessible mains socket 230 V ~ 50 Hz. Your CD player is now ready for operation. OPERATION VIA EXTERNAL AUDIO SYSTEM You can connect your CD player to an external audio system such as the receiver of your stereo system to play your CDs via this equipment. Make sure to switch off the audio system prior to connecting the CD player. Connect the LINE OUT cable with the LINE OUT jack of your CD player and the CD or AUX jacks of the audio system. EARPHONES/HEADPHONES CONNECTION Turn the VOLUME control to minimum and connect the stereo earphones to the PHONE jack. Now adjust the volume according to your wishes. 4 CD-Porty_MD40983_UK. FH11 Wed May 19 11:40:15 2004 Seite 5 S P E C I F I C AT I O N S VOLTAGE SUPPLY Mains adapter Input: Output: Output power: Model no. : 230 V ~ 50 Hz 4. 5 V o 500 mA 2. 25VA CSD0450600G OPERATION IN THE CAR Connect the adapter cable for the cigarette lighter to the DC input jack of the CD player. Connect the cigarette lighter adapter to the cigarette lighter. Then, you connect the audio adapter cassette to the PHONE jack of the CD player and insert the adapter cassette into the cassette compartment. Make sure during installation that the adapter cassette is correctly clicked into position in the cassette compartment. Turn your car radio to cassette playback. In individual cases, problems might occur during the operation of the adapter cassette. In this case, please contact our Service Centre. B B S E S P M O E D P R O G . ® BATTERY OPERATION DC- input jack 2 x 1. 5 V mignon cells R6/LR6 or 2 x 1. 2 V NiCd rechargeable batteries Adapter for cigarette lighter DC IN 4. 5V PHONE jack ME LU *VO PHONE O E G FF RO A H C N Audio adapter cassette Car cassette compartment DV IN 4. 5 V CONNECTING JACKS Headphones: LINE OUT: 3. 5 mm jack connector, stereo 3. 5 mm jack connector, stereo Please make sure that the adapter cassette is correctly clicked into position in the cassette compartment. C D O P E R AT I O N INSERTING CD CD PLAYER / LASER Laser Class: Wavelength 1 Open the CD compartment by sliding the OPEN CD switch to the right. Insert a CD with the labelled side facing upwards. Do not open the CD compartment while the CD is still playing or rotating. Before opening, press the STOP button twice. Symbol ESP memory l = 788 nm p0 < 0. 39 mW cw DIN EN 60825-1 Ed. [. . . ] If the display is completely filled with beams, the 60 second memory has been charged. NOTES: The ESP function should always be switched on when the device is moving. If you do not require the memory, press ESP to switch it off and save battery charge. ESP memory being filled BBS - BASS AMPLIFIER Actuate the BBS button to amplify basses. Press BBS three times: bass amplification off. During the stop mode, press the MODE button three times until INTRO appears in the display. [. . . ]