User manual MEDION DIGITAL CAMERA MD 85173

[. . . ] Do not place the unit in an enclosed area or next to heat appliances such as radiators. Please make sure the unit has sufficient air circulation. Please keep all plastic packaging materials away from children. Should any small objects or fluids get into the unit, please remove the device from the power supply and get it checked by a specialist before further use. [. . . ] You can use the EXIT button to call up the channel list if the information panel is not active. Change to TV or radio list You can also enter a channel number using the number buttons directly. The entry can be shortened using the OK button (e. When you wish to enter a single figure channel number) or EXIT to cancel. DVB-conform transmitters offer information to their programs such as the title and description to the current and following event. When a channel has been selected the title and a short description to the current program is shown in the status panel. The following description explains the individual functions to the EPG: Detailed view Detailed view to following event Daily overview Detailed information to the current program is reached by pressing the INFO/EPG button For information to the following event use these buttons: /. The list of programs for the whole day is reached by pressing the INFO/EPG button again when detailed information to the current event is open (from 6 a. To the right of this you see how many days of information are available and which day you have activated. If you wish to change to the next day go to the end of the list and press or . To change to previous day go to the beginning of the list and press or . Smart cards sometimes have misleading printing because they were designed with other proprietary decoders in mind. For most Common Interface modules the cards have to be insert with the golden contact pad turned up. When decoding modules are properly inserted, the names of the modules appear in the menu point "Encryption" in the main menu. Note: Some modules only generate a menu system when the correct card is in place. the buttons OK and EXIT are used in the navigation of module manufacturers menus. If there is for some reason no response in these menus to OK and EXIT the communication between the receiver and module menu system can be cancelled with the MENU button. The built in timer can administrate up to 12 recordings. There by you can choose a fixed recording date or day of the week for each timer command. the recordings are programmed in the menu point "Timer" in the main menu. All dates to the 12 entries can be seen in the overview. The individual entries can be processed using the OK button. [. . . ] The field "Totals" gives information about the found channels. When the search is completed the select channels window will be inserted. This window contains the channel list on the left and the list of newly found channels on the right. To change between TV and radio channels use the TV and RADIO buttons of the remote. [. . . ]