User manual MEDION MD 82069 CODE LIST

[. . . ] It is not intended for commercial use in a heavy industry environment. Use under extreme environmental conditions can result in damage to your device. · This device is only suitable for using in dry, internal rooms. Included in the box Check that nothing is missing from the packaging and inform us of any missing party within 14 days after purchase. The delivery of the projection clock you have purchased includes: · Projection clock · Documentation Helpline No. [. . . ] It may be that an electronic discharge has taken place if the device demonstrates disruptions to functions. Remove the mains plug from the mains and take out the batteries in this case. Then, replace the batteries and reconnect the device to the mains. The device will be restored to its previous status in this way. Helpline No. UK/Northern Ireland 0871 37 61 02 0 Rep. Ireland 1 800 992 508 Web Support www. medion. co. uk Model Number 82069 10 Cleaning the unit Always disconnect the AC mains plug before cleaning the unit. To clean the unit, only use a moistened, soft cloth. Do not apply chemical solvents or cleaning agents, as they may damage the surface and/or labelling of the unit. Helpline No. UK/Northern Ireland 0871 37 61 02 0 Rep. Ireland 1 800 992 508 Web Support www. medion. co. uk Model Number 82069 11 Setting up Power connection 5 The mains plug serves to operate the projection function and the clock with display itself. For backup purposes the device runs with one 9V block battery (not included). In case of a power interruption the set time will remain in the device's memory so there is no need to re-set the time afterwards. Plug the mains plug into a well accessible 230 V ~ 50 Hz socket. Inserting the batteries Press the clip on the cover of the battery compartment down and remove it. Insert a 9 V battery (6F22/6LR61/AM-6) as shown on the back wall of the battery compartment. Remove the battery from the device if you are not using the device for a longer period. Helpline No. UK/Northern Ireland 0871 37 61 02 0 Rep. Ireland 1 800 992 508 Web Support www. medion. co. uk Model Number 82069 12 Using the Alarm Clock Setting the clock 6 Set the switch SETTING to the position "TIME". Rotate the Multi-Jog anti-clockwise to set the minutes, clockwise to set the hours. Once the time is set, move the switch SETTING to the position "RUN" to complete time setting. Setting the projection clock To turn on the projection permanently, move the PROJECTION switch to the position ON; switch the projection off by moving it back to OFF. The projection will automatically start at the time you have set the alarm, regardless of whether the projection is set on or off. Set the hours by pressing simultaneously the HOUR button and the TIME button. Keep them pressed until the hour digits are displayed. [. . . ] Do not dispose of used batteries in the household rubbish!They must be deposited at a collection point for used batteries. Helpline No. UK/Northern Ireland 0871 37 61 02 0 Rep. Ireland 1 800 992 508 Web Support www. medion. co. uk Model Number 82069 17 Technical Specifications Frequency range Battery backup Power source 9 AM 522 ­ 1620 kHz FM 87. 5 ­ 108 MHz 9V battery (6F22/6LR61/AM-6) AC 230V ~ 50 Hz Subject to technical and optical changes as well as printing errors. [. . . ]