User manual MEDION MD 82294 CODE LIST

[. . . ] Trademarks: Applied trademarks are the property of their respective owners. Subject to technical and optical changes as well as printing errors. Please read this section carefully and follow all instructions given. This guarantees reliable operation and a longer life expectancy for your loudspeaker. [. . . ] Putting the transmitter into operation You can operate the transmitter with the mains adapter or with the batteries. If you will be using the transmitter outdoors, then use only the batteries. Plug the mains adapter into a wall socket. Also comply with the operating instructions of the device to which you will connect the transmitter. Switch off all devices before connecting them. You can connect a multitude of different audio devices to the transmitter, e. An MP3 and CD player, the receiver from your stereo system, a computer or even your television. You will need an audio cable with cinch plugs. Insert the red and the white cinch plug into the relevant coloured AUDIO IN R and L sockets of the transmitter. Note Devices such as a stereo receiver or a television usually have one red and one white audio output socket. These are usually identified with OUT, AUDIO OUT, LINE OUT or similar. To use these output sockets, you will need a 2 x cinch -> 2 x cinch connection cable (not included; available from specialised trade). Note If the volume decreases after switching off the audio device, set the volume back to a medium volume after connecting the audio device. If the volume at the audio device is too low, there may be disruptions in the transmission between the transmitter and the loudspeaker. Partially pull the connector plug out of the transmitter and then plug it into the headphone output socket of the audio device. Note If you want to attach the connector plug back to the transmitter, then pull it out just a tiny bit so that it is retracted automatically. The power light on the front will light up green. Switch on your audio device, select a medium loud volume and start the playback. The power light of the loudspeaker will light up green. If the power lights light up green, the devices are ready for operation. If the power lights light up blue, the devices are switched on and active. Ready to operate (green power light) Transmitter · ⷠThe audio device was switched off No audio signal for more than 4 minutes because playback is not switched on Loudspeaker does not receive a signal for more than 4 minutes because it is not switched on or there is no radio contact The radio contact to the transmitter was interrupted · Note If radio contact is not established within 5 minutes, the loudspeaker switches off completely. [. . . ] The service hotline is subject to [national rate] telephone call charges. The price of your call will be stated at the beginning of the call. Special warranty conditions for MEDION PC, notebook, pocket PC (PDA) and navigation devices (PNA) The following terms apply to MEDION PC, notebook, desktop, pocket PC and laptop products and optional items included with such products. If one of these items has a fault, you also have a warranty claim for its repair or replacement, from MEDION. [. . . ]