User manual MEDION MD 82663

[. . . ] Introduction 1 Congratulations on choosing to buy a Tevion® product. By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of the leading manufacturers. All products brought to you by Tevion® are manufactured to the highest standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 3 Year Warranty. Please fill in and return the Warranty Card to the address provided. [. . . ] If the device has both an EPG and a Showview function, the EPG function is given priority. Ireland 1-800-992 508 Web Support www. medion. co. uk Model Number: 82663 15 Operating combined devices Combined devices are for example a TV set with an integrated video recorder, a TV set with a DVD player or a DVD recorder with a video recorder. Several controlling options are available to combined devices. Combined devices with two device codes Some combined devices (e. g. TV set with video recorder) require two device codes one for each device part. Program the correct TV code on the TV mode key and the video recorder code on the other mode key. The combined device is then controlled like two separate devices. Combined devices with one device code Other combined devices only require one code. In this case, you must first select the device part you would like to operate. Example: The device is a combined DVD recorder/video recorder. The device code was stored on the DVD mode key. Now activate the DVD part in the combined device by holding down the DVD mode key for longer than one second. To activate the video recorder in the combined device, first briefly press the SETUP key for the SHIFT function, then the DVD mode key. If your combined unit only requires one code but you would like to operate it with two mode keys, then proceed as follows: Programme the device code to two mode keys. Operate one of the unit parts with one of the two mode keys. Use the learn function (see "Learn function" on page 19) to transfer the desired functions of the other unit part to the other mode key. ALL OFF function You can switch off all pre-programmed devices at the same time. This is done as follows: Press the ALL OFF key twice in rapid succession and keep it pressed down after the second time for approx. When you release the key, ALL OFF appears and the devices are switched off. Some devices can be switched on and off with the ALL OFF key Devices switched off in such a way will, if they were switched off, be switched back on when you perform the ALL OFF function. Helpline No. Ireland 1-800-992 508 Web Support www. medion. co. uk Model Number: 82663 16 Set timer The universal remote control has two timer functions: a sleep-timer for the TV (automatic switch off after 1 to 90 minutes); "Zzz" appears in the display: four additional times for customisable commands (e. g. switching to another programme); the bell symbol appears in the display. 13 TV sleep-timer Set sleep-timer Keep the SETUP key pressed down for approx. Press SETUP briefly twice more to open TIMER SETUP. Press OK. The number of minutes flash in the display. Use the arrows to enter the time after which the TV device should switch itself off automatically. [. . . ] Use the arrows (press twice) to select the VOL/MUTE RESET menu. PLEASE WAIT appears again in the display, followed by the confirmation message SUCCESS. Helpline No. Ireland 1-800-992 508 Web Support www. medion. co. uk Model Number: 82663 24 Additional functions Sky Box keys 17 There are some keys especially configured for Sky Box services. You can directly use the following features with your universal remote control: box office: shows the Box Office screen interactive:shows the Interactive Services screen tv guide: shows the TV Guide screen back up: shows the previous screen sky: sets your remote control to control your Sky Box services: shows the customer services screen All other keys like the colour keys or number keys work with the corresponding function of your Sky receiver. Factory settings Use Reset to restore all device settings to the factory settings. Codes that have been programmed in, learn functions and macros are therefore deleted. [. . . ]