User manual MEDION MD 97930 QUICK GUIDE

[. . . ] Notes on This Manual Keep these instructions with your computer at all times. The proper set up, use and care can help extend the life of your computer. In the event that you transfer ownership of this computer, please provide these instructions to the new owner. This manual is divided into sections to help you find the information you require. [. . . ] If encrypted transmission is used, this must operate according to the same principle on all devices. Encryption is a method of protecting the network from unauthorized access. * 300 Mbp/s ) can vary according to the distance and loading of the partner. * 300 Mbit/s is a gross value. A maximum of 75 Mbit/s will be achieved on the application level. A WLAN router in accordance with the 801. 11 standard will be necessary, in order to be able to exploit the complete performance. - 48 - UK/ N. IRELAND HELPLINE 1-800-992508 (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher) Why does an error message appear when I click on the network environment?The computer name must be unique on the network and may not be the same as the task group. It appears that the network boards are unable to communicate. What might be the problem? If two PCs should be linked you require a cross-link cable, otherwise use a patch cable. In addition, check the protocols and the configuration. IRELAND HELPLINE 1-800-992508 (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher) The data transmission is incorrect or very slow. Maybe you have the wrong cable (UTP / CAT3 or lower) or the problem is the proximity of a power cord or another source of interference. For further hints on troubleshooting refer to the Windows help under "Network errors". Aid Handling Maybe one of the used network boards works with a different speed (e. 10 instead 100 Mbit/s) and your network computer is unable to recognize this. If necessary, set the network driver to the compatible speed. Safety Troubleshooting within the Network The Multimedia Card Reader Memory cards are media that are being used for a variety of purposes, especially in digital photography. They are increasingly replacing the floppy disk. The form and capacity of a memory card can vary according to the manufacturer. Your notebook supports the following formats: MMC (MultiMediaCard) SD (Secure Digital) When inserting memory cards, ensure that the contacts are facing the right way. Incorrect insertion of a card can cause damage to the card reader and/or the card. Card type SD (Secure Digital) MMC (MultiMediaCard) Contacts pointing downwards pointing downwards Inserting Memory Cards Note Memory cards can only be installed in one direction. Refer to the instructions on the previous page. Push the memory card into the slot. Removing Memory Cards In order to remove the card, first push it into the contact to unlock it. [. . . ] 15 Power ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Power socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 USB-Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]