User manual MEDION RDS CAR RADIO MD 41550

[. . . ] This car radio is simple to install in every standard ISO radio slot. If your car has no standard ISO radio slot please contact you car dealer. Push the installation frame into the radio slot in the dashboard of your car. Bend the lugs in the installation frame using a screw driver to firmly fix the frame in the vehicle. [. . . ] Now you can select and save the station by pressing the TUNE button. After a short waiting period, the unit switches back into the automatic station-search mode. Preset stations In each wave band up to six stations can be memorised and recalled using the station buttons 1-6 (14). Automatic memory system (AMS) Keep the AMS/MP3 button (18) pressed until you hear a signal sound. The number flashing in the display shows the number of the station key where the corresponding station is to be stored. The tuner automatically scans past stations with a weak reception. Now all stations are played for some seconds. When the desired station is reached, give the AMS/MP3 button (18) a short press. To select only the alternative frequencies of the desired regional programme keep the AF/REG button (3) pressed for some time until a signal sound will be audible to switch the mode on or off. You can now choose the type of programme your station is to broadcast from the following categories: (The information given depends on the radio station) TA Traffic announcements Press the TA button (2) for a short time to switch the TA mode on or off. When the TA mode is switched on and traffic announcements are broadcast, and the unit has been switched to CD or AUX, the unit is automatically switched to radio reception. The unit temporarily switches to the EON network station, if EON finds a traffic announcement on a different programme. if the TA button (2) is pressed for longer , the EON TA LOCAL / EON TA DISTANCE mode is selected. With this mode it is possible to allocate information to EON TA when you listen for instance to a station without traffic announcements. If there is a traffic announcement on another station frequency the unit automatically switches to this station for this period of time. As soon as the announcement is finished the unit switches back to the previous station. Besides the usual music and text pieces, additional information is broadcast in form of encoded digital signals which can be evaluated by the car radio. When a station is received, the name of the programme and other information is shown on the display (8). This information given depends on the radio station. Different RDS services are offered: PI: PS: AF: Program Identification Code The radio can identify the received station using the PI code. EON: Enhanced Other Networks Information If there is any traffic announcement it is switched over to a station with traffic announcements within the station chain when you listen to a non-traffic announcement station. PTY: Program Type Code Using Program Type the radio can look for stations with programme contents which can be preselected, e. [. . . ] Remove the CD from the player, then insert a new CD. Always insert the CD with the The CD has been inserted writing facing upwards. Clean the CD or try to play another one. Allow to cool until the ambient temperature is back to normal. [. . . ]