User manual MEDION UNIVERSAL REMOTE CONTROL MD 4689

[. . . ] Do not expose your remote control to dust, intense sunlight, humidity, high temperatures or mechanical shocks. Old and new batteries must never be combined. Do not use any corrosive or aggressive cleansing agents. Scope of application This universal remote control is designed to control 8 devices such as: TV TV with teletext VCR Video recorder DVD DVD player CD CD player ASAT Analogous satellite receiver DSAT Digital satellite receiver CBL Pay TV decoder AUX for additional devices (TV, VCR, SAT, CD, DVD, . . . ) Please note: The designations on the MODE keys like "TV", "VCR" etc. have the only purpose to facilitate their identification. [. . . ] The remote control starts the search and sends a code every second. Each time a code is sent, the LED will light up. 3 Manual URC 4689 UK Apr05. fm Seite 4 Montag, 11. As soon as the device does respond to the remote control, press OK. Should you fail to press the OK key in time, you can step by step return to the code to which the device has responded using the CHAN­ key. If you want the remote control only to send a new code every 3 seconds instead of every second, proceed as follows: Press and release CHAN+ (or PLAY or POWER) twice (see step 5). This will give you more time, but the procedure will also take longer. Code search by brand This function provides you with the possibility of searching by brands. You will find the brands in the code table under "Search code under brand name". Switch on manually the device you wish to control (TV, VCR etc . . . ). 3 seconds until the LED indicator lights continuously. Briefly press the desired MODE key (TV, VCR, DVD, SAT, DSAT, CD, CBL, AUX). Enter the applicable one-digit code from brand code table , , Search code under brand name". If you enter the digit , , 0", all brands will be searched. Press the CHAN+ key (or, in case of video cassette recorders, POWER or PLAY) until the device responds correctly. Proceed swiftly when doing this, otherwise the automatic code search will be started. Store the code by pressing the "OK" key. If all codes have been searched, the LED will blink for about 3 seconds. Code identification The code identification allows you to identify codes that you have already entered and that are memorised in the remote control. 3 seconds until the LED indicator lights continuously. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL, AUX). To find the first digit, press each number key from 0 to 9 until the LED turns off. The number you pressed is the first digit of the code. To determine the second and the third number, repeat the procedure. The LED will go out as soon as the key for the third number has been pressed. [. . . ] Switch on manually the device you wish to control (TV, VCR, . . . ) 2. · Check whether the batteries of the remote control are correctly inserted and whether the polarity + / - matches with the marks. · If the batteries are too low, replace them by new ones. Several device codes are listed under the brand of my device. [. . . ]