User manual MEDION UNIVERSAL REMOTE CONTROL MD 81035 CODELIST

[. . . ] You can of course assign other types of device to these keys. 1 Manual URC 4689 UK Apr05. fm Seite 2 Montag, 11. April 2005 12:00 12 Overview Inserting the batteries Insert 2 LR03/AAA or R03/AAA batteries; we recommend you to use of alkaline batteries. Open the cover on the back of the remote control. Check the +/­ polarity on the batteries and inside the compartment. [. . . ] In case of some special device models, the procedure described may fail to be successful. ­ The Code search starts with the 3-digit number stored at the moment. Code search (automatic search) An automatic search allows you to find even codes of brands that are not stated in the code list. Switch on manually the device you wish to control (TV, VCR etc . . . ). 3 seconds until the LED indicator lights continuously. Briefly press the desired mode key TV, VCR, DVD, CD, SAT, AUX. Point the remote control at the device you wish to control and press the CHAN+ key once briefly. If the device does not possess a channel function, then press the PLAY or POWER key instead of CHAN+. The remote control starts the search and sends a code every second. Each time a code is sent, the LED will light up. 3 Manual URC 4689 UK Apr05. fm Seite 4 Montag, 11. As soon as the device does respond to the remote control, press OK. Should you fail to press the OK key in time, you can step by step return to the code to which the device has responded using the CHAN­ key. · You can assign one remote control to each of the MODE keys. 4 Manual URC 4689 UK Apr05. fm Seite 5 Montag, 11. April 2005 12:00 12 · Place the remote controls with the infrared diodes on a table so that they point each other at a distance between 15 and 50 mm. · You can store up to 150 commands. When the memory is full, the backlight illumination of the MODE key will blink for 3 seconds. · Each programming of a key can take approx. · Always chech that the key you wish to teach a code is free or does not correspond to an important function. · The following keys cannot be programmed with functions: LEARN, SET, ALL OFF, P<P, SHOWVIEW and all MODE keys. · First have a try by programming any desired code and testing it then. Thereafter, delete all codes and proceed with the proper programming. Do not use the learn function beneath an energy saving lamp. Programming functions 1. 3 seconds until the LED indicator lights continuously. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL, AUX). [. . . ] Enter the first channel number (3 digits as maximum). Press again P<P and the mode key of the device you wish to control. Enter the second channnel number (3 digits as maximum). Certain TV sets have also a toggle function (depending on the manufacturer, it can zap from the present and the previous channel). [. . . ]