User manual MEDION UNIVERSAL REMOTE CONTROL ND 4689

[. . . ] Do not throw batteries in the general household waste disposal. The code of the appliances you wish to control are included in the code list here enclosed. Look up the brand of your appliance and note the code numbers. About, until the LED indicator lights continuously. [. . . ] Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). To identify the first digit press each number button from 0 - 9 until the LED turns 0ff. At this step, the number you pressed is the first digit of the code. To find the 2nd and 3rd digit, repeat the above process. When the third digit has been found the LED will go off. The MD4689 remote control can stock certain functions which are not included in the entered code, even appliance codes which are not in the code list. You need your original remote control for this. To avoid mistakes, please follow the below advice. Use new batteries for both remote controls. Only one appliance code can be stocked per Mode key Point your existing remote at the MD4689 remote (front to front) with a distance of about 5 centimetres between the remotes. When the memory capacity is full, the LED will blink during 3 seconds. Learning a key can take 3 seconds Always check that the MD4689 key you wish to teach a code is free or does not correspond to an important function. No functions may be stored under the following keys: LEARN, SET, ALL 0FF, P<P, SHOWVIEW, and any other MODE key. Experiment by learning 1 code initially (to ensure compatibility) and then clear the stored learned commands before completely learning your original remote's keyboard. About, until the LED indicator lights continuously. Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). Press and release the button on the MD4689 remote which will learn the function. Press the function key on your original remote that you want to transmit. Repeat steps 5 and 6 for each function you want to learn. When you're finished learning all the keys, press "SET". About, until the LED indicator lights continuously. Press and release the mode key of the device you wish to control (TV, VCR, DVD, CD, SAT, AUX). [. . . ] About, until the LED indicator lights continuously. Press the "Mute" key during 8 seconds about, till the LED turns on a second time Certain keys of the remote control may include a second function. To access to this second function, press and release "SET" key (the LED blinks), then press the key corresponding to this second function. Are the A/V appliances plugged in and turned an · check that the batteries have the correct polarity position in the battery compartment · If the batteries are too weak, change them by new ones. [. . . ]