User manual MEDION UNIVERSAL X-LINE VISTA PC

[. . . ] Notes on this Manual Keep these instructions with your computer at all times. The proper set up, use and care can help extend the life of your computer. In the event that you transfer ownership of this computer, please provide these instructions to the new owner. This manual is divided into sections to help you locate the information you require. [. . . ] Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 Colors 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit Resolution 1600 x 900 1600 x 1200 1920 x 1080 1920 x 1200 1920 x 1440 2048 x 1536 Colors 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit 8-, 16-, 32bit You can change the graphics setting using the Personalization help program in the Control Panel. The graphics driver will ensure that it will not be possible to set any resolution unsuitable for the graphics system at the same time. Recommended vertical scanning rates for tubed devices (CRT) are 75 -85 Hz and 60-75 Hz for LCD monitors. Read the Operating Instructions of your monitor as well. OPERATION 41 Appendix 8-, 16-, 32bit Help Operation Connecting Safety Connecting the PC to a Television The optional Video outputs (TV-out) are located on the back of your PC. They offer you comprehensive possibilities of transferring the image on your PC to the television. Note You will need a SCART, S-video, composite or a component cable for connecting your device to the PC according to the equipment. This is not included in the scope of the delivery, but it can be obtained through a specialist shop. Read precisely which cable you need in the Operating Instruction of your TV device. How to Connect the PC to a Television: Note To use the TV function you must first connect the TV to the graphics card before starting up the PC. Connect the composite or S-video input on your device to the corresponding output (folded down overview: V) on your PC. Switch on the television to see the PC image on your TV set. Start up the PC and wait for Windows to fully load. In the Personalization program set up the configuration. Note Video outputs are only planned for playback. Use the video inputs for recordings. 42 THE GRAPHICS CARD The Sound Card Diagram reference: H1, I, J1, J2, T1, T2, U1, U2 Your PC has an integrated audio sound chip. It is compatible with industry standards Sound Blaster and Microsoft Sound System Version 2. 0. This guarantees optimal support for all popular programs and games. Note The speaker/headphones output is designed for active speaker systems or headphones. Passive speakers cannot be used or if they are the quality will be significantly reduced. You can make the necessary settings for configuring the loudspeakers, etc. by means of the software supplied with the PC. You open the configuration program, to make user-defined settings, by means of the symbol on the right in the task strip. OPERATION 43 Appendix Help Operation Connecting Safety USB Port Diagram reference: E Note Devices connected directly to the USB bus should not draw more than 500 mA. The voltage output is protected by a fuse (Limited Power Source according to EN 60950). [. . . ] 79 Electromagnetic compatibility 79 Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 F Factory Settings Recovery . . . . . . . . . . . . . . . . . . . . . . . . . 65 FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 G Graphics card . . . . . . . . . . . . . . . . . . . . . . 41 H I IBM® Microdrive. . . . . . . . . . . . . . . . . . . [. . . ]