User manual MEDION VCR DVD PLAYER COMBINATION MD 80975

[. . . ] TABLE OF CONTENTS Safety instructions . Displaying and editing the current status . 25 26 26 26 28 29 29 30 Connections and connection options 7 Connecting the television with a SCART cable . 7 Connecting the television with an antenna cable 8 Connecting the DVD player/VCR through a satellite receiver . [. . . ] The menu displays an overview for all scheduled progammes. In order to delete a programming, select it with the arrow buttons and press OK/ENTER. Press the number button 0 and Confirm with OK/ENTER. In order to change a programming, select it with the arrow buttons and press OK/ENTER. You can carry out the changes as described in the section "Normal timer recording", page 21. DVD PLAYER/VCR ­ MD 80975 21 VCR RECORDING More video cassette functions The counter The counter counts in real time from the point you load the cassette. The counter does not count unrecorded parts of the tape. If you rewind beyond the zero position, the counter counts in negative values (e. ­0:01:15). Display information When a cassette is loaded, you can call up information by pressing the DISPLAY button: 1 x: Complete information on current status > time and date; 2 x: Counter. When the cassette is not playing (playback, fast forward, fast reverse), the remaining time does not appear. Auto repeat To turn on the auto repeat function, press the PLAY button for five seconds during stop or still mode. The DVD player/VCR will then repeatedly play the tape from beginning to end. To stop this mode, press the button or a playback mode button (PLAY, FF, REW, STOP). The menu TAPE CONTROL The menu tape controls provides more control functions. This menu only appears when a cassette is loaded. To open the menu, press SETUP, then select T A P E C O N T R O L , and confirm with OK/ENTER. Tape remain This function allows you to see if there is enough space on the cassette for a planned recording. Confirm T A P E R E M A I N with OK/ENTER. In the next menu, select the length of the cassette currently inserted. You will see the remaining time in the format HH:MM for a few seconds in the right bottom corner of the TV screen (in the picture below: 1 hour 27 minutes). Go to zero With this function you can access the zero position of the cassette. This is the position where the cassette started after inserting it, after switching the device on, or after resetting the counter (see next chapter). 22 VCR RECORDING In the menu T A P E C O N T R O L , select G O T O Z E R O and confirm with OK/ENTER. The cassette will automatically rewind to the zero position and then stop. Counter reset In the menu T A P E C O N T R O L , select C O U N T E R R E S E T and confirm with OK/ENTER. The current position of the cassette will be set to 0 : 0 0 : 0 0 . Finding the index marks When you record a programme, the VCR places an index mark at the start of the recording. In the menu T A P E C O N T R O L , select I N D E X + or I N D E X - and confirm with OK/ENTER. I N D E X + searches forward, I N D E X - searches backwards on the tape. The VCR will search forward or backwards and start playback at the next index mark. [. . . ] Incorrect image format (4:3, 16:9) Check in the S E T U P menu > V I D E O > T V A S P E C T whether the selected format matches the television. No sound Has the sound been switched off (MUTE)?DVD playback is either in fast forward or slow motion. The remote control does not work No batteries inserted or batteries flat. [. . . ]