User manual MEDION WEBCAM HEASET E86002 MD 85872

[. . . ] If the mains cable on the device is damaged it must be replaced by the manufacturer, his customer service agent or other suitably qualified person. This is to avoid causing damage to the device. 2 Electromagnetic compatibility You must comply with the European directive on electromagnetic compatibility when you connect the USB web camera and stereo head set. To avoid interference and data loss always maintain a distance of at least 1 metre between the devices and high-frequency and magnetic objects (TV sets, speakers mobile phones, etc. ). Only used a screened USB cable for connecting the USB camera to your PC. Connecting Position the cable so that nobody is able to step on it or trip over it. [. . . ] Important files may be changed or overwritten when you are installing programs or drivers. Before installing the program make a backup of your original files which you will be able to access later if problems occur after installing the software. Note Install the software before connecting the USL web camera and stereo headset. 13 Place the CD in the drive. The installation menu will start automatically. Note: If installation does not start automatically the so-called "Autorun" function may be disabled. Manual installation without Autorun: Click "Start" and select the "Run" feature. Now enter the name (letter) of the CD-ROM drive followed by a colon and the program name "Autorun. exe" Confirm with "OK". The installation menu will suggest the following items for installation: - PC camera driver (hardware driver) - ArcSoft Software Suite (photo editing software) Install the hardware driver and editing software in sequence. Follow the instructions on the screen. 14 Re-start your computer. The editing software automatically places a shortcut to the programs "PhotoImpression 5" and "VideoImpression 5" on your desktop, which you can use to transmit images after the USB web camera is connected. 15 2. Connecting the USB web camera to the PC Connect your USB web camera to your computer as follows: The driver software must already be installed (page 3). Switch on the computer and all peripheral devices (monitor, printer modem, etc. ) and wait until operating system has finished booting. Insert the end of the USB cable ( ) into one of your computer's empty USB ports ( ). Windows® will recognise that new hardware has been connected and will complete the installation. Note: A dialogue box will appear if your system is set up to install signed software/drivers (released by Microsoft) only. The wording in the box will differ from system to system. driver you wish to install did not pass the test . . . . " This does not indicate that the driver is faulty, but merely points out that there is no Microsoft signature. Click "Next" to install the driver. 16 3. Setting up the camera Setting up the USB camera on the monitor provides the best viewing angle. Please note the following: The ideal angle is achieved by setting up the USB camera in the centre of the monitor. Adjust the focus ring on the lens to focus the camera. Keep an eye on the live image as you are doing this. You can also set up the camera on a table or hold it in your hand. Positioning the camera lens You can turn the camera body on the base to achieve the desired angle. 17 4. Connecting the stereo headset to the PC You can connect the headset while the computer is running (known as "hot-plugging"). [. . . ] What steps have you already taken to try and rectify the problem?Please provide your customer number if you have one. 22 Disposal Device At the end of its life, the appliance should not be disposed of in household rubbish. Enquire about the options for environmentally friendly disposal. Packaging Your appliance has been packaged to protect it against transportation damage. The packaging is made of environmentally friendly material which can be recycled. [. . . ]