User manual MEDION WINNIE-THE-POOH TV MD 20060

[. . . ] Keep plastic packaging out of the reach of children. There is a risk of asphyxiation. Setting the unit up safely Place the device on a sturdy, level surface. It is not designed for use in rooms that are very humid (e. g. Always ensure that : · there is adequate ventilation (do not place the appliance in a shelving system or where curtains or furniture may obstruct the ventilation holes), there are no direct heat sources (e. g. [. . . ] When headphones are in use, the loudspeakers are turned off. Too high a volume, especially when using headphones, can damage your hearing. For this reason, you should turn the volume right down before connecting the headphones. Power connection Do not connect the appliance to the mains until you have made all the other connections. Insert the device's plug into a mains socket (230 V ~ 50 Hz) that is close to the place where you have set up the device. Connecting other equipment The SCART socket on the rear and the Audio/Video inputs on the front panel can be used to connect various audio and video appliances (video-recorders, satellite receivers etc. ). To connect an external appliance, connect it: · either with a SCART cable (SCART socket on rear of TV), · or with audio Cinch cables (AV connectors on front panel of TV). Please note the instructions regarding additional equipment in the operating instructions. 9 Disney_TV_MD20060_UK. fm Seite 10 Mittwoch, 14. September 2005 5:33 17 KEY FUNCTIONS Switching on/off · · Press the POWER switch on the device to switch it to standby mode. Press the button STANDBY on the remote control to turn on the set. When turned off at the POWER switch, the last used settings are stored. If the appliance is turned off while in standby mode, it returns to standby mode when next switched on via the POWER switch. If turned off while showing a programme from a particular station, it will show that same station when next switched on by pressing POWER. . When in standby, the set can be switched on by pressing a programme select button on the set or the Power button on the remote control. Setting the volume · · · Press the or button to turn the volume up or down. To turn the sound off completely, press MUTE. Press MUTE again or a volume button to turn the sound back on. Programme selection · The programme selection keys can be used to select any one of the stored programmes. The number keys can be used to enter the programme number directly: ­ for a one-digit programme number, simply enter the required number; the sign for a second digit will disappear from the screen after a few seconds, ­ for a two-digit programme number, enter the two digits one after the other without a long pause between them. Programmes on which the SKIP button was used (see below) can only be selected with the number keys. · The INFO button displays the number of the current programme on the screen. Press INFO again to turn off the programme number display. · 10 Disney_TV_MD20060_UK. fm Seite 11 Mittwoch, 14. September 2005 5:33 17 · The QUICK VIEW button can be used to switch back and forth between the current programme and the one previously selected. Other key functions TV/AV This key switches between TV operation, VIDEO 1 and VIDEO 2. With VIDEO 1, you access the SCART connection at the back of the device; with VIDEO 2 you access the video and audio inputs on the front of the device. Sleep Timer Press the SLEEP button to program an automatic turn-off. · · Press SLEEP once - the minutes will be shown as 0. With each further press, the sleep timer is increased by 10 minutes up to a maximum of 120 minutes. To turn off the sleep timer, press SLEEP repeatedly until "0" is displayed. The OSD disappears after a few seconds. Skip With the SKIP function, you can leave out a programme when zapping with the programme select buttons. [. . . ] Is the main fuse / circuit breaker in order?Has the main switch been pressed (standby indicator on)? No sound Is the sound muted?Are the loudspeakers fitted? Poor picture quality Adjust contrast and brightness Is the antenna cable or SCART cable connected correctly? Only noise (snow on the screen and hissing from the speakers) Check the antenna connection. You may need to fine-tune manually. No colours Is the programme being transmitted in colour? [. . . ]