User manual MELICONI SPEEDY GOAL

[. . . ] Press them together to turn ON your TV on programme 1. ON/OFF to turn OFF your TV and, in some cases, to turn ON your TV. To select the previous programme or to turn ON your TV. [. . . ] IF YOU DO NOT HAVE THE PROGRAMME SELECTION KEYS ON YOUR ORIGINAL REMOTE CONTROL + If your remote control does not have the programme selection keys (e. Etc) once you have programmed Speedy Goal, you can still select the programmes from 0 to 9, as follows: AV and · Hold down the keys simultaneously until the light indicator starts to flash indicating that the remote control is in programming mode. + · Release the keys and press P 8 times within 12 seconds. Make sure you can change programmes from 0 to 9 using the P and P keys. If not, repeat the search operation, starting from point 2. If the commands work incorrectly or erratically, you have probably entered a code for a similar but different remote control. In this case, repeat the search procedure from point 2 until all keys respond correctly to the commands sent. Identify and take note of the TV code which you have searched for, following the code noting procedure (see "PROGRAMMED CODE NOTING" section). If no keys are pressed for 12 seconds · If you press keys other than those indicated · if the code search list is completed. When you have programmed Speedy Goal Meliconi, note down the code on the label in the battery compartment cover. to find the code for your remote control: 1. Hold down the AV and keys simultaneously until the light indicator at the top starts to flash indicating that the remote control is searching for the code. Release the keys and, within 12 seconds, press Release P and and pay attention to the flashing of the LED: a long flash corresponds to a + while a short flash corresponds to a - . Note the sequence of the 8 flashes and note them down on the label in the battery compartment cover, from left to right. If the remote control is no longer programmed because it has been left without batteries for a long time or has flat batteries, you can re-program it quickly as follows: 1. Hold down the AV and keys simultaneously until the light indicator at the top starts to flash indicating that the remote control is programming. Release the keys and, within 12 seconds, using the P and P keys, enter the eight-sign code which you noted down before. At the end, three flashes indicate that the code has been saved correctly. [. . . ] If you have any queries about Speedy Goal: · Read this booklet carefully ­ this will help you to solve almost all problems · Com to answer all your queries more easily and quickly. WARRANTY: 2 years The warranty ceases to be valid if the product is tampered with or used incorrectly. This symbol appearing on a product or its packaging indicates that the product must not be considered as normal household waste, but must be taken to a special waste collection centre for recycling electric and electronic appliances. [. . . ]