User manual MELITTA C35

[. . . ] Original operating instructions c35 Manufacturer: CAFINA AG Römerstraße 2 5502 Hunzenschwil Tel. : +41 (0)62 889 42 42 Fax: +41 (0)62 889 42 89 info@cafina. ch www. cafina. ch 2 TSM SUCCESS MANUAL® designed and copyright by Contents 1 For your safety 1. 1 1. 2 1. 3 1. 4 Explanation of the safety symbols Basic safety instructions User rights c35 Certification of the c35 4 4 4 5 5 10 Settings and functions of the "MANAGER" menu 10. 1  Product-related "MANAGER" settings 10. 2 "Products" submenu 10. 3 "Functions" submenu 10. 4 "Price/Gratis" submenu 10. 5 "Counters" submenu 10. 6 "Time and Date" submenu 20 20 20 21 22 22 23 2 Identification 2. 1 2. 2 Identification of the appliance type Brief description of the appliances 7 7 8 3 Overview of appliance 3. 1 3. 2 Overview Control panel with the function keys 9 9 9 11 Emptying and Filling 11. 1 Emptying 11. 2 Filling 24 24 24 4 Delivery and installation 4. 1 4. 2 Delivery Installation 10 10 10 12 Cleaning 12. 1 Equipment 12. 2  Automatically initiated cleaning of the coffee machine 12. 3 Intermediate cleaning of the coffee machine 12. 4 Cleaning the exterior of the coffee machine (cleaning the housing of the c35) 12. 5  Cleaning the Milk Cooler and the Cup Warmer 25 25 25 25 27 27 5 Power and water connection 5. 1 Preparation for Power and Water Connection 11 11 6 Starting up the appliance 6. 1 6. 2 Starting up the appliance for the first time Starting up the appliance after a malfunction or prolonged shutdown 12 12 12 13  hutdown and Storage S 13. 1  Shutting down the appliance for a limited period or for good 13. 2 Storage 27 27 27 7 Turning on and off 7. 1 7. 2 7. 3 c35 and milk part Milk cooler Cup warmer 13 13 13 13 14 Disposal 14. 1 Disposal of Consumables 14. 2 Disposing of the Appliance 28 28 28 8 Dispensing the product 8. 1 8. 2 8. 3 Coffee and milk drinks Hot water Manually foaming and heating milk using the steam nozzle 14 14 15 15 15 Troubleshooting, Error Messages and Fault Repair 28 15. 1 Checklist for Troubleshooting 28 15. 2 Error display by means of diagnosis points 29 9 Chip cards 9. 1 9. 2 9. 3 9. 4 "USER" 16 16 17 18 19 16 Technical Data and Installation Diagram 17 Index 18 EC Declaration of Conformity 19 Notes 29 32 33 34 "MANAGER" "MEMORY" Additional chip cards 3 1 For your safety 1. 1 Explanation of the safety symbols  1. 2. 3 General hazards DANGER DANGER Danger to life from electric shock –  ever turn on an appliance which is damaged or N has a defective power cord. –  f there are signs of damage (e. g. smell of burning), I immediately disconnect the appliance from the power supply and contact your service technician. –  damaged power cord on the appliance must be A replaced by a qualified service technician. [. . . ] 2|  eave the card in until prompted by the display L to remove the card. 19 10 Settings and functions of the "MANAGER" menu 10. 1 Product-related "MANAGER" settings up/down left/right +/– = Select main menu option. = Open particular submenu options = Set the values. If +/– are pressed simultaneously, values are deleted or re-initialised. Product Functions Price/Gratis Counters Time/date Operation: 1| Main menu option: Select products. ➤ The selected product is indicated on the lower edge of the display. INFORMATION It is not necessary to acknowledge the settings. INFORMATION The product keys are assigned to the same products as in the product menu. Use the page selection key to scroll between the product pages or between the product levels. Water quantity Coffee quantity 40 ml 10. 0 g 3. 0 sec 12. 0 sec 0. 0 sec 10. 2 "Products" submenu 10. 2. 1 Water quantity The water quantity can be set separately for each product. Operation: 1| Select "Water quantity" submenu option. 2| Select a product using the round product keys. ➤ The selected product is indicated on the lower edge of the display. 3| Press the white plus and minus keys to set the water quantity. 4| Leave "Water quantity" submenu option by pressing the left orange arrow key. 10. 2. 2 Coffee quantity The coffee quantity can be set separately for each product. Operation: 1| Select "Coffee quantity" submenu option. 2| Select a product using the round product keys. ➤ The selected product is indicated on the lower edge of the display. 3| Press the white plus and minus keys to set the coffee quantity. The maximum setting range is +/– 1 g. 4| Leave "Coffee quantity" submenu option by pressing the left orange arrow key. 1. time PSB INFORMATION The "S" and "B" functions can be programmed by authorised technicians only. time) Under this menu option you can set the quantity of the first product, which is dispensed before the coffee, for mixed drinks. Depending on the product, this consists of hot milk, cold milk or milk foam. 20 Operation: 1| Select "1. 2|  elect a product using the round product keys. S ➤  he selected product is indicated on the lower T edge of the display. [. . . ] Contact technical customer service. "DP 0" to "DP 6" and "DP 8" to "DP 31" System fault 16 Technical Data and Installation Diagram On request the c35 is also available with a second grinder. CAFINA c35 Product dispenser Coffee Hot water Steam Milk Hourly output in cups: Café Crème Espresso Cappuccino Hot water: litres/hour Electrical specifications: Rated output Power connection Ambient specifications: Ambient temp. Relative humidity External dimensions: Width Height (including bean hopper) Depth 350 mm 774 mm 350 mm 774 mm 350 mm 774 mm 350 mm 774 mm 150 mm 621 mm 350 mm 218 mm 280 mm 621 mm Min. 80% 2. 8 kW 230/16 6. 8 kW 400/16 6. 8 kW 400/16 6. 8 kW 400/16 0. 15 kW 0. 15 kW 0. 3 kW 230/10 200 250 0 30 200 250 0 40 200 250 200 40 200 250 200 40 yes yes no no yes yes yes no yes yes no yes yes yes yes yes 4-litre container 4-litre container 1W 12C 12M 12CM c35-mcs Milk cooler (narrow) c35-mcu Base refrigerator c35-cw Cup warmer 650 mm 650 mm 650 mm 650 mm 547 mm 650 mm 547 mm 29 16 Technical Data and Installation Diagram (Continued) CAUTION An all-pole separator with a contact opening width of at least 3 mm per pole must be provided on the installation side. ➤  aximum system impedance in the building conM CAUTION Remember to have these preparations made and to have the appliances at hand on the day of  installation. nection 0. 10 ohms (the impedance can be requested from the energy supplier). [. . . ]