User manual MELITTA EPOUR 1024-12

[. . . ] Dear customer, Thank you for purchasing the Melitta® epour® filter coffee machine. The operating instructions will help you discover the wide range of options offered by the appliance, prepare the best possible coffee and thus enjoy your coffee to the full. If you require further information or have any questions, We hope you enjoy using your new filter coffee machine. for your safety The appliance complies with the valid European directives. [. . . ] ) the PRE-BREW button before the start of brewing activates this setting for the subsequent coffee preparation. The PRE-BREW button lights up continuously and the water flow is stopped briefly at the start of brewing after initial damping of the coffee. The last setting is stored for the next preparation. Start the coffee preparation by pressing the BREW button briefly (<1 sec. The BREW button now starts to flash slowly. Note: If you hear a brief signal sound three times during this process, there is no water in the water tank. If you are unable to start brewing and hear three short signal sounds despite the water tank being full, lift the water tank slightly and fit it back This removes any air bubbles which may possibly have formed during filling. During brewing, the water is heated and flows via the rotating outlet onto the coffee powder . Different brewing profiles are stored in the appliance for the different preparation quantities of 2 to 8 cups. Depending on the quantity of water filled, the rotation directions and times are adapted so that the GB coffee powder is always dampened in an optimum way. Note: It is also possible to manually control the direction and time of the rotation during brewing (see "3. You will hear a brief signal sound at the end of preparation. The BREW button will now light up continuously to indicate the warm-keeping phase. The keep-warm plate will keep the coffee hot and then switch off automatically after 40 minutes to avoid unnecessary power consumption. You can, of course, switch off the appliance manually at any time by pressing the BREW button longer (>1 sec. The drip stop on the filter holder prevents coffee continuing to drip when you remove the jug from the appliance. The removable filter holder allows you to dispose of the filter paper easily and trouble-free. Manual extraction control is possible after the outlet starts to rotate The button lights up. ) allows you to then change the rotation direction of the outlet manually. You can change the direction of rotation as many times as you want. The manual extraction control is ended again by pressing the CONTROL button longer (>1 sec. The brewing profiles stored for the preparation quantities or number of cups are suitable for preparing numerous different types of coffee. [. . . ] ) of the BREW button starts the descaling process. Once about half of the liquid has run through the appliance, stop the process by pressing the BREW button again briefly (<1 sec. Wait for 10 minutes to ensure that the remaining descaling fluid removes as much limescale from the appliance as possible. Next reactivate the appliance by pressing the BREW button longer (>1 sec. [. . . ]