User manual MELITTA LATTICIA ONE TOUCH F300-100

[. . . ] Connect the appliance only to a properly installed earthed socket. The appliance must always be disconnected from the power During operation, parts of the Let at the filter become very hot. Do not open the filter holder Do not use the appliance if the Do not allow the power cable to Come into contact with liquids. Never immerse the appliance in Do not clean the parts that Come into contact with food Cleaning can be found under This appliance can be used by Children from 8 years of age or Older if they are supervised or Have been instructed in the safe Use of the equipment and have Not be carried out by children, Unless they are 8 years or older Away from children under 8 years The appliance may be used by Have been instructed in the safe use of the appliance and have understood the potential hazards. [. . . ] Ensure that the appliance is connected to the power source. Fill the water tank with the desired amount of water using the glass pot. With the help of the water level display on the tank you can choose the correct number of cups. 85 ml coffee per cup, large cup symbol = approx. Close the lid on the water tank and place the glass pot with closed lid in the appliance. Into the filter holder by hand, to ensure a good fit. Using 6-8 g of ground coffee per large cup. Swivel the filter back into the appliance. With the Melitta® Aroma Selector you can set The taste of your coffee with just one hand: From After making your coffee the hotplate will keep it Warm and will turn off automatically after the time Turn the machine off manually at any time. The drip stop prevents your coffee from dripping When you remove the pot from the appliance . With the help of the detachable inner filter you can Dispose of the filter bag simply and easily. The brewed coffee flows through the central valve in the insulated lid of the pot. To pour coffee press down on the sealing lever . Remove the lid simply by pressing the seals on the Side while lifting the lid up . The appliance is equipped with a TIMER feature. This starts the brewing process at a time you programme. Prepare the appliance as described in point 5 `making coffee', but without pressing the START button. To set the desired start time, hold down the TIMER button . The first time you programme it the display will show 00:00. Set the desired start time by repeatedly pressing the h and m buttons . This goes faster if you hold down the button. After letting go of the TIMER button the current time will show. [. . . ] Within the guarantee period we will correct all device defects that are based on material or manufacturing errors, through repair or replacement of the device at our discretion. Replace parts become the property of Melitta®. Defects that occurred due to improper connection, improper handling, or repair attempts by nonauthorized persons are not covered by the guarantee. The same applies for failure to comply with the use, care, and maintenance instructions as well for the use of consumables (e. [. . . ]