User manual MEMOREX MKS8590OM

[. . . ] MKS8590 User's Guide Karaoke/Audio Recording System with 5. 5" B&W Monitor, USB Jack & SD/MMC Memory Card Slot Before operating this product, please read these instructions completely. Dear Customer, Please read this manual thoroughly before operating the unit to become more familiar with it and obtain the performance that will bring you continued enjoyment for many years. Keep these instructions handy for future reference. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. For future reference, record the serial number of the unit printed on the rear of the cabinet. Serial Number ______________________________________ CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] If you are finished listening, press the OPEN/CLOSE area on the top of the unit to open the CD compartment. 1 1 Remove your disc and press the 1 1 POWER button to turn the unit off. 8 CD PAUSE CONTROL OPERATION (CONTINUED) 2 1 TO BEGIN PLAYBACK FROM A SPECIFIC TRACK During CD playback, if you wish to pause the disc momentarily, press the CD+G PLAY/PAUSE (®p) button. Playback stops but the disc continues to spin and the PLAY/PAUSE indicator will blink. Press the CD+G PLAY/PAUSE (®p) button again to release pause and resume normal CD playback; the PLAY/PAUSE indicator will light. 1 2 1 1 2 1 1 1 FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH ( After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the CD+G SKIP/SEARCH o 1 or n 2 button to select a specific track for playback. When the desired track number blinks in the display, within five seconds, press the CD+G PLAY/PAUSE (®p) button. Playback will begin on the track you selected. 1 2 1 During playback, press the CD+G SKIP/SEARCH n button once to advance the player to the beginning of the next track. Press the CD+G SKIP/SEARCH n button repeatedly to advance the player to higher-numbered tracks. 1 During playback, press the CD+G SKIP/SEARCH o button once to move the player back to the beginning of the current track. Press the CD+G SKIP/SEARCH o button repeatedly to move the player back to lower-numbered tracks. 9 CD ONLY During playback, depress and hold either the CD+G SKIP/SEARCH n or o button to move the player forward or backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the button is depressed. When you release the CD+G SKIP/SEARCH n or o button, normal playback will resume. 3 / ) REPEAT PLAYBACK OPERATION (CONTINUED) 2 3 1 2 3 1 4 1 2 1 2 PROGRAMMED PLAYBACK To repeat a single track, while in the Stop mode, press the CD+G REPEAT button once; the REPEAT indicator will blink. Press the CD+G SKIP/SEARCH o 2 or n 3 button to select the specific track that you wish to repeat. When the desired track number blinks in the display, within five seconds, press the CD+G PLAY/PAUSE (®p) button to begin playback. The specific track you selected will be repeated continuously. To repeat all of the tracks on a disc continuously, while in the Stop mode, press the CD+G REPEAT button twice; the REPEAT indicator will light solid. Press the CD+G PLAY/PAUSE (®p) button to repeat all tracks. To cancel Repeat Playback, press the CD+G REPEAT button until the REPEAT indicator goes out. You can also cancel Repeat Playback by pressing the CD+G STOP (I) button . The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks on any disc for playback in any desired order. You may program 19 different tracks or you may also program certain tracks to play more than once. To perform programmed playback, proceed as follows: 1 2 3 Press the POWER button to turn the unit on. Press the OPEN/CLOSE area on the top of the unit to open the CD compartment. Place a CD in the compartment, with the printed label side facing up and close the CD compartment door. Press the CD+G PROG. button; "0" will blink in the display and the PROG. indicator will blink. CONTINUED ON THE NEXT PAGE 10 4 OPERATION (CONTINUED) 5 6 1 3 1 1 2 3 2 3 2 Press the CD+G SKIP/SEARCH o 1 or n 2 button to select the first track that you wish to program. When the desired track number blinks in the display, press the CD+G PROG. button again. 7 2 1 Press the CD+G PLAY/PAUSE (®p) button to begin programmed playback. indicator will blink and playback will begin on the first track that you programmed. The player will continue to play all of the tracks that you programmed in the order in which you programmed them. When the last programmed track has been played, the player will stop and the display will again show the total number of tracks on the disc. [. . . ] · Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink, may damage the surface. COMPACT Cleaning the Unit · To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. · The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. [. . . ]