User manual MEMOREX MMP8550WHTOM

[. . . ] MMP8550 User's Guide 256 MB MP3/WMA Digital Audio Player Before operating this product, please read these instructions completely. COPYRIGHT: · Distributing copies of MP3, WMA with DRM or WAV tracks without permission is a violation of international copyright laws. PRECAUTIONS SAFETY: · Vibration experienced during walking or exercising will not affect the player. However, dropping the player or dropping a heavy object on the player may result in damage or sound distortion. · Avoid spilling any liquid onto or into the player. · Do not leave the player in a location near heat sources; in a location subject to direct sunlight, excessive dust, sand, moisture, rain or mechanical shock; on an unlevel surface; or in a car with the windows closed during periods of excessive heat. ROAD SAFETY: · Do not use headphones while driving, cycling or operating any motorized vehicle. [. . . ] At the Welcome screen, click NEXT. 6. Select the desired privacy options. 11 WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT. ) 7. Click on Privacy Statement to view the Statement, if desired. Read the instructions and tick the check boxes as desired. Then click on More Options and tick the check boxes as desired. 9. Click "Finish" to finish the installation of the Windows Media Player 10. 12 TRANSFERRING FILES You can download digital music files from the Internet or use encoding software to convert music that you have on an audio CD into MP3 or WMA format. Once these files are stored on your computer you can easily copy them to your player. For Windows XP, if you already installed Windows Media Player 10, you can transfer music files (MP3, WMA, WMA files with DRM 9 or DRM 10) to the player through the "Sync" function of Windows Media Player 10. Connect your computer to the USB port on your computer using the USB cable. "MPT Player" or "MMP8550" will appear in your "My Computer" folder which indicates the player is connected. Then, follow the procedure on page 16 to transfer music files to the player. For Windows ME, Windows 2000, Windows 98 or Windows XP (without Windows Media Player 10), transfer music files as follows: 1. Connect your player to the USB port on your computer using the USB cable as shown on page 6. A "Removable Disk" window will automatically pop-up on your computer screen. To add more files and songs to your player, simply drag and drop MP3 or WMA files from anywhere on your computer into the "Removable Disk" window. IMPORTANT: A WMA file with DRM 9 or DRM 10 will not play back if you directly drag and drop it into the "Removable Disk" window. You must use Windows Media Player 10 to transfer copy-protected files as described on page 16. DOWNLOADING AND TRANSFERRING FILES 13 TRANSFERRING AUDIO FILES TO YOUR DIGITAL AUDIO PLAYER USING A MACINTOSH COMPUTER Make sure to use a Macintosh computer with an operating system of 10. 0 or layer to transfer audio files. Turn on your digital audio player. DOWNLOADING AND TRANSFERRING FILES (CONT. ) 3. Connect the smaller end of the cable to the USB jack on the player and the larger end of the cable to the USB port on your Macintosh. 4. Your computer will automatically recognize your player and mount a hard disk icon onto your desktop. Locate the folder where your audio files are stored on your computer's hard drive. Simply drag and drop the audio files onto the mounted hard disk drive icon of your digital audio player located on your desktop. 6. [. . . ] Do not format this player unless it stops working and you are instructed to do so by technical support personnel. FORMATTING THE PLAYER 1. Use the USB cable to connect the player and the computer. Double click on My Computer, then right click "MPT Player", "MMP8565" or "Removable Disk" and left click on "Format". For "MPT Player" or "MMP8550", at the "Format" window, click OK to confirm and the player will start to format (see figure to the right). [. . . ]