User manual MEMOREX MPD-8505CP

[. . . ] Please do not attempt to defeat or bypass the safety switches. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product. 1 · · · · · INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Press the PLAY/PAUSE (®p)/ POWER ON/BAND/v button 2 to turn the unit on. 1 Slide the FUNCTION switch 1 to the RADIO position. Press the PLAY/PAUSE (®p)/ POWER ON/BAND/v button 2 to select a band (AM or FM). If listening to FM, press the MODE/CLEAR button 3 to select Stereo or Mono. 3 1 2 4 3 2 Press and release the Skip/TUNING DN o / 1 or UP n / ® 2 button to tune a station. Press and hold the Skip/TUNING DN o / 1 or UP n / ® 2 button for rapid search tuning. 1 5 To turn the radio, and the unit, off, press the STOP (s)/POWER OFF/w button. 2 1 7 AUTO SEEK Press and hold the Skip/TUNING DN o / or UP n / ® button for approximately 1 second and the unit will automatically search for the next available station. ANTENNAS AM­This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception. FM­The headphones act as an antenna for FM. Extend the headphones wire for best FM reception. Adjust the VOLUME control 1 and DBBS switch 2 as desired. If FM STEREO reception is weak/noisy, press the MODE/CLEAR button 3 to select Mono, in this case the reception will be monaural. TO SET AND RECEIVE A STATION INTO MEMORY RADIO OPERATION (CONTINUED) 1 2 1 2 Tune a desired station as described in the previous section. Press the PROGRAM/ENTER button; the preset number will blink. 3 Within approx. ten seconds, select the desired preset using the ESP/MENU/ PRESET button 1. Press the PROGRAM/ENTER button 2 to confirm. 2 1 To receive a preset station, simply press the ESP/MENU/PRESET button to select the desired preset. 8 TO INSERT AND PLAY A CD CD OPERATION This CD player is designed to play all kinds of Audio Discs and MP3/WMA CD Roms, such as CD recordables and rewritables. 13 To repeat all files in a directory (MP3/WMA CD only), while in the Stop mode, press the MODE/CLEAR button 1 three times; "REP D" will appear in the display. Press the Skip/TUNING DN o / 2 or UP n / ® 3 button to select the specific directory that you wish to repeat. Press the PLAY/PAUSE (®p)/POWER ON/BAND/v button to begin playback. The "REP D" indicator will disappear from the display after a few seconds and all files in the selected directory will be repeated continuously. 2 2 INTRO PLAYBACK (Will play the first 10 seconds of each track) CD OPERATION (CONTINUED) 1 2 While in the Stop mode, press the MODE/CLEAR button 3 times (4 times if an MP3/WMA CD with multiple directories is inserted); "INTRO" will appear in the display. TO RANDOMLY PLAY BACK A CD Press the PLAY/PAUSE (®p)/POWER ON/BAND/v button to begin Intro playback. The "INTRO" indicator will disappear from the display after a few seconds and the first 10 seconds of all tracks on the disc will be played in sequence. 1 2 2 2 While in the Stop mode, press the MODE/CLEAR button 4 times (5 times if an MP3/WMA CD with multiple directories is inserted); "RANDOM" will appear in the display. Press the PLAY/PAUSE (®p)/POWER ON/BAND/v button to begin playback. TO CANCEL INTRO OR RANDOM PLAYBACK: 2 1. Press the STOP (s)/POWER OFF/w button to stop playback, the selected 2 indicator will appear again, press the MODE/CLEAR button repeatedly until the MODE indicators disappear from the display. If in INTRO mode, press the MODE/CLEAR button once during playback, "RANDOM" will appear in the display. Press the MODE/CLEAR button until the Mode indicators disappear from the display to return to normal playback. In Random mode, press the MODE/CLEAR button once to return to normal playback. 14 The "RANDOM" indicator will disappear from the display after a few seconds and the unit will play all the tracks in random order. When all the tracks have been played, the unit will stop. TO PROGRAM THE MEMORY (UP TO 24 TRACKS) CD OPERATION (CONTINUED) Programming is the ability to preselect the order in which a series of tracks will be played. 1 2 1 2 While in the Stop mode, press the PROGRAM/ENTER button. The track num- ber will blink and "P-01" will appear in the display. 3 Select a track to be programmed using the Skip/TUNING DN o / 1 or UP n / ® 2 button. [. . . ] Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. · Do not attach adhesive tape, stickers, etc. · Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. [. . . ]