User manual MEMOREX MVD-2026

[. . . ] This Caution Marking is located at the bottom enclosure of the unit. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION IMPORTANT SAFETY INSTRUCTIONS The symbol for class II (Double Insulation) CAUTION: THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION (SEE SERVICE PROCEDURE). USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. [. . . ] Press the Number 1 button 2 for AM or the Number 2 button 3 for PM; the End Time hour digits will blink. NOTE: You can also use the Navigation (, ) buttons followed 1 by the Navigation (®) button to select between AM and PM. 7 8 3 1 2 Press the Navigation () button to cycle through the Tape Speeds (SP or SLP). When finished, press the SETUP button 1 to store the program. "Program has been saved" will appear on screen temporality. Setting for another program as desired or press the SKIP n Button 2 to select another program. When finished, press the SETUP button 1 twice to exit the setup menu. Turn the unit off or press the SELECT (VCR/DVD) button (on the main unit) or DVD button (on the remote) 3 to switch to DVD mode; the Timer indicator will light in the display. When the actual time matches the timer On time, the unit will turn on and record as per the program. NOTES: You can set up to 8 programs for Timer recording. NOTES: 1. Make sure to have a recordable cassette inserted with enough space/time for the program recording. After you have stored the programs, if the programs are overlapping (The recording time on the programs are overlapped). When it reaches "0:00:00", playback will start automatically. 1 1 SETTING THE COUNTER SEARCH 1 2 1 1 2 2 With a prerecorded video cassette tape inserted, enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Scroll to Search using the Navigation () button 1. Press the OK button 2 to select it; the Search will appear. Press the Navigation () button 1 to select Counter Search, then press the OK button 2; the Counter Search menu will appear. 1 1 3 2 NOTE: When searching, press the STOP s button to cancel the searching. 1 Enter the desired counter number to go to using the Number buttons 1. (Enter the hour for the first digit, then enter the minute for the second and third digit; i. e. , to search and playback starting from 1 hour and 10 minutes, enter "1", "1", "0". ) Then press the OK button 2; the VCR will then search and start playback when the counter position is reached. 27 INDEX SEARCH + VCR SETUP MENU (CONTINUED) 1 2 2 With a prerecorded video cassette tape inserted, enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Scroll to Search using the Navigation () button 1. Press the OK button 2 to select it; the Search will appear. 1 1 2 Press the Navigation () button 1 to select Index Search +, then press the OK button 2; the unit will then fast forward to the next index point and then play from that point. 1 1 INDEX SEARCH ­ 1 2 2 With a prerecorded video cassette tape inserted, enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Scroll to Search using the Navigation () button 1. Press the OK button 2 to select it; the Search will appear. 1 1 2 Press the Navigation () button 1 to select Index Search ­, then press the OK button 2; the unit will then rewind to the index point and then play from that point. 1 1 NOTE: When searching, press the STOP s button to cancel the searching. 28 INDEX NUMBER SEARCH VCR SETUP MENU (CONTINUED) 1 2 2 With a prerecorded video cassette tape inserted, enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Scroll to Search using the Navigation () button 1. Press the OK button 2 to select it; the Search menu will appear. 1 1 2 Press the Navigation () button 1 to select Index Number Search, then press the OK button 2; the Index Number Search menu will appear. 1 1 3 2 2 4 1 Select a desired Index Number (two digits) to go to using the Number buttons 1, then press the Navigation () button 2. Select the direction (Reverse or Forward) using the Navigation () or (®) button; the unit will then rewind or fast forward to the desired Index Number and start playing from that point. NOTES: · For index number search function, if the tape has 10 index points and you are playing from the 3rd index point or the playback is stopped after the 3rd point, if you input "04" for the index number and "Forward" for the direction, the unit will search and start playing from the 7th index point. [. . . ] The tape is blank. Try another tape. Have the video heads cleaned. Try another tape. Insert a prerecorded tape. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW. MEMOREXELECTRONICS. COM OR CONTACT CUSTOMER SERVICE AT PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993. (954) 660-7100 51 Caring for Discs · Treat the disc carefully. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. CARE AND MAINTENANCE · · · · Do not attach adhesive tape, stickers, etc. Clean the disc periodically with a soft, lint-free, dry cloth. [. . . ]