User manual MEMOREX MVD-2256

[. . . ] If using a compatible TV, select Progressive and connect this unit using the Component jacks on the rear of this unit. COMMON QUESTIONS How do I select a different channel?For ANTENNA, enter a two digit channel number; i. e. , enter "02" for Channel 2, enter "69" for Channel 69. For CATV, enter a three digit channel number; i. e. , enter "002" for Channel 2, enter "125" for Channel 125. 1 23 4 5 6 7 8 9 10 11 12 6. 16. CONNECTING THE DVD TO A TV AND CATV USING THE RF INPUT/OUTPUT JACKS BASIC CONNECTIONS TV SETUP PAGE: When the recorder is turned on for the first time, there will be several wizard pages displayed one by one which will allow you to set the basic options as follows: 1. [. . . ] If you have not scanned for the available channels or stations, then you may not be able to record the TV channel. · During Manual Scan, press the STOP (X) button to cancel searching. · Press the SETUP button to exit the Manual Scan screen. · When all the available stations are searched, then "Scan is Over" will appear on the screen, press the ENTER button followed by the Navigation (®) button to search for the desired station again. · To return to the previous row of options, press the Navigation () button. · To exit setup, press the SETUP button. 30 EDITING TV CHANNELS INITIAL SETUP MENU (CONTINUED) 1 2 1 2 1 2 While in the TV Tuner mode, enter the TV Setup page as described on the previous page. Then, select CH Edit using the Navigation (, ) buttons 1, then press the ENTER button 2. To Skip the currently viewed channel select SKIP using the Navigation (, ) buttons 1, then press the Navigation (®) button 1 to select ON to skip the channel when using the Channel Up or Down buttons 2. To Add the currently viewed channel select SKIP using the Navigation (, ) buttons 1, then press the Navigation (®) button 1 to select OFF to not skip the channel when using the Channel Up or Down buttons 2. 3 4 1 2 Follow procedure in step 1. To Fine Tune the currently viewed channel select CH FINE TUNE using the Navigation (, ) buttons, then press the Navigation (, ®) buttons repeatedly to fine tune the selected station as desired. Follow procedure in step 1. To Copy the currently viewed channel into another channel number, select COPY TO using the Navigation (, ) buttons 1 then select the desired channel number using the Navigation (, ®) buttons 1. When done, press the ENTER button 2 to make the change. You must subscribe to these channels through your cable company. 33 IMPORTANT: When " " appears while pressing a button, this means that the corresponding function cannot be performed either on the disc inserted, or in the selected mode. AUDIO MODE You can cycle between the audio modes as follows: DVD BASIC OPERATION (GENERAL) 1 For DVD, Press the MTS AUDIO button repeatedly to cycle through the audio languages available on the playing DVD. Separate languages must be recorded on the DVD to use this feature. For CD/VCD, Press the MTS AUDIO button repeatedly to cycle through L-Mono (Mono Left), R-Mono (Mono Right), Stereo and Mix-Mono. 1 MUTE 1 Press the Mute button to turn off the sound; the unit's sound will be silenced and the Mute indicator will appear at the left bottom side on the screen. (For MP3 discs, "Mute" will appear on the screen. ) The sound can be turned back on by pressing this button again. 1 34 While playing a DVD, press the DISPLAY button to view the control options. Press the Navigation (, ®) buttons to select the desired icon, then press the ENTER button to select it. Once selected, press the Navigation (, ) buttons or the Number buttons to change the option, then the ENTER button, if required, to confirm the change. When finished, press the DISPLAY button to remove the control options from the TV screen. DISPLAY BUTTON (DVD MODE): DVD BASIC OPERATION Title: Select this option and enter the desired title using the Number buttons or Navigation (, ) buttons; the selected title will then start playing automatically. The first number is the current title and the second number is the total titles. Chapter: Select this option and enter the desired chapter using the Number buttons or Navigation (, ) buttons; the selected title will then start playing automatically. The first number is the current chapter and the second number is the total chapters. During playback, you can directly press the SEARCH button to enter and select a chapter; then you will be able to enter the desired chapter for playback using the Number buttons. [. . . ] Place the disc on the disc tray correctly inside the guide. Try another disc, or wait for a scene which allows a different camera angle. POSSIBLE SOLUTION Some functions do not operate as stated. Selected language is not being shown in the subtitles, or spoken. Angle cannot be changed. Some features and functions are not available on all discs. [. . . ]