User manual MEMOREX MVDP1076OM

[. . . ] MVDP1076 User's Guide 7'' TFT DISPLAY PORTABLE DVD PLAYER WITH REMOTE CONTROL Before operating this product, please read these instructions completely. Contents . 11 · Effective Distance of the Remote Control Transmitter. 12 · Connecting the Unit to a TV Using the A/V Cable. 12 · Connecting the Unit to a Home Theater System . [. . . ] Wide-screen images are shown on the screen with a black band at the top or bottom. 16:9: Select when the unit is connected to a widescreen TV. NTSC: Select when using an NTSC TV. AUTO: Select AUTO only if your TV supports both formats, the output signal will follow automatically the video format on the DVD disc. IMPORTANT: In the USA, the standard is NTSC. Press the SETUP button to enter the menu, select AUDIO using the Navigation (, ®) buttons, then press the ENTER button to select it. Select/change the Setup option as described on page 18. DIGITAL OUT 1 Select the desired Digital Out for coaxial audio transmissions: RAW: Select to use the coaxial for Dolby Digital Audio. PCM: Select for two channel Digital mode. Selects the Left and Right channel for stereo audio output. 20 Press the SETUP button to enter the menu, select RESET using the Navigation (, ®) buttons, then press the ENTER button to select it. RESET SETUP MENU: RESET SETUP MENU (CONTINUED) 1 Press the ENTER button to reset the functions of the player to the original factory settings. 21 BASIC OPERATION When " " appears while pressing a button, this means that the corresponding function cannot be performed either on the disc inserted, or in the selected mode. ROTATE BUTTON IMPORTANT: MUTE BUTTON 1 1 Press the MUTE button once to mute the sound; the Mute indicator will appear on the screen. Press the MUTE button again to restore the sound; the Mute indicator will disappear from the screen. Press the ROTATE button on the main unit to flip the display's picture 180°. This is useful when the screen is rotated as shown on page 8. Press the ROTATE button again to flip the display's picture back to the normal position. HEADPHONE JACK(S) 1 SOURCE BUTTON 1 1 2 For private listening, plug headphones into one or both of the Headphone jacks. The speakers will be disconnected when headphone(s) are connected. To view the image/hear the sound from an external unit, press the SOURCE button to select AV Input. Please refer to page 15 to connect an external unit to this player. NOTE: While in the AV Input mode, only the POWER button (on the main unit) and the SOURCE button will function. 22 OSD BUTTON BASIC OPERATION (CONTINUED) 1 2 LCD BUTTON While playing a DVD, press the OSD button to cycle as follows: 1st press: Title elapsed and remaining time 2nd press: Title elapsed and remaining time and the various DVD settings. 3rd press: Display off While playing a CD, press the OSD button to turn the display on or off. 1 1 2 VOLUME 1 1 2 1 2 1 3 Press the LCD button 1 to access the onscreen picture display menu. Repeatedly press the LCD button 1 to cycle through Brightness, Contrast and Color, then use the Navigation (, ®) button 2 (on the remote, or use the Alternate Navigation (, ®) button on the main unit) to adjust. When finished, press the LCD button 1 repeatedly until the onscreen picture display menu disappears to exit. NOTE: If no button is pressed after eight seconds, the on-screen picture display menu will disappear from the screen. 2 The main Volume control 1 is located on the side of the unit. To adjust using the remote, use the VOLUME + 2/­ 3 buttons, but make sure the main volume is set to a desirable level first. 23 IMPORTANT NOTES: · After plugging in, the unit will be in the Power Off mode. Press the Power button on the main unit to turn on the unit. · · · · · · DVD OPERATION " " will appear on the screen during operation if you try to access a function that is not available on the disc. Some discs may take a few seconds to load. [. . . ] Some functions do not operate as stated. Selected language is not being shown in the subtitles, or spoken. Make sure to insert a DVD; "DVD" will appear in the display. Subtitles are not working properly. Angle cannot be changed. The disc is dirty. Some features and functions are not available on all discs. [. . . ]