User manual MEMUP MEDIADISK ZX

[. . . ] Feel Design User Guide MEDIADISK ZX Series USER GUIDE SAFETY AND OTHER INSTRUCTIONS PRODUCT VIEW CONNECTION REMOTE CONTROL INTERFACE 1. SETUP MENU NAS FUNCTION UPGRADING FIRMWARE SPECIFICATIONS TROUBLESHOOTING 1 2 3 7 10 11 12 12 13 14 19 33 33 35 37 Mediadisk ZX Series is a Home Media Center, with a built-in 3. 5" HDD, can display Analog and Digital TV with its hybrid TV tuner, record and play media files (movies, audios and photos) through TV and when connected to PC, can also copy and play shared files via network. SAFETY AND OTHER INSTRUCTIONS Please use ZX carefully and read following instructions. >>> Copyright Software, audio, video or any intellectual properties are protected by copyright and international laws. It is user's responsibility when reproducing or distributing content(s). [. . . ] The photo will be displayed in full screen. When the photo is displayed in full screen mode, the slide show starts automatically. While listening to music files, you can browse photos at the same time. While browsing a photo, you can press [LEFT] / [RIGHT] to rotate in any angle. Besides rotating a photo, you can press []ZOOM] to zoom in/out. Four zoom levels are available. - 15 - 5. 4 Browse Movies Use [LEFT] / [RIGHT] on remote control to select the Movies tab. All directories and supported video files in current directory will be displayed. Press [UP] / [DOWN] to select the movie you want to view. The movie will be played in full screen mode. Browsing movies function supports DAT, VOB, IFO, MPG, AVI, and TS file formats. While browsing a movie in full screen mode, you can press [ZOOM] to zoom in/out the image. Four zoom levels are available. 5. 5 Browse via Network You can play multimedia files in streaming, even shared files on the local area network (Ethernet or WLAN). Make sure that you read 6. 6 Changing Network Settings and make the appropriate settings. When you select NET in Browser, you can locate multimedia shared files on your local network by browsing through workgroup; or by browsing through `My_Shortcuts'. 5. 5. 1 Browse through Workgroup You can choose the workgroup from the list which your PC belongs to, find your PC name. Then select the shared multimedia file that you want to browse. While browsing high definition video files (resolution up to 720p / 1080i / 1080p) via Ethernet or WLAN, video might be buffering. It is due to the network limit speed or signal strength. Due to different network conditions, sometimes the workgroup might not be accessible or shown in the list. you then need to use `My_Shortcuts' to browse shared files. - 16 - You can also set `Specific File Server IP' and access it from `My_Shortcuts' in the menu. Network Browser Set Net User ID, Net Password, and Specific File Server IP, to browse files on NET through `My_Shortcuts'. 5. 5. 2 Browse through `My_Shortcuts' Select Net User ID and the entry screen will appear. Press the Navigation buttons to select letters and numbers. Select Net Password and the entry screen will appear. Select Specific File Server IP, and use Navigational and Numeric buttons to enter IP address. You can also select Detail to set the Label, Domain, and Host Name of the shortcut. - 17 - Select the shortcut you added. Then select the shared multimedia file that you want to browse. 5. 6 Rename / Delete Files When in browser menu, you can press [MENU] to activate a popup where you can rename and delete files or folders. Press [UP] / [DOWN] to select from Return, Rename, and Delete. 5. 7 Manage the Playlist The ZX supports the playlist function, which allows you to add your favorite content to the playlist. 5. 7. 1 Add files to the playlist Select the favorite file you wish to add, press [RED] button on remote control bottom and the file will be thicked. Press [GREEN] button on remote control bottom to confirm, and then an on-screen message `Add select to list' will be shown. [. . . ] The firmware version number is displayed behind SW Version; 3. Compare it with the latest firmware released in the website www. memup. com Download the latest firmware from www. memup. com - 33 - Step 1: Prepare the USB device You will need a USB device (key for example) for firmware upgrade. Copy the 5 files for upgrade to the root directory of your USB device. Step 2: Connect the USB device Plug the USB device into one of the USB HOST port of the ZX. Step 3: Hold the POWER / STANDBY button Press and hold the POWER / STANDBY button on the front panel, and do not loosen. [. . . ]