User manual MEMUP MEDIADISK LX SERIES

[. . . ] >>> Copyright Software, audio, video or any intellectual properties are protected by copyright and international laws. It is user's responsibility when reproducing or distributing content(s). >>> Codec Check This product may not support some media formats. >>> Data Backup Please backup datas stored in this product in a safe place. [. . . ] When playing music, it changes the pre-equalized modes. Select to view scene from different angle, if the DVD was recorded in multiple angles. It activates and deactivates the subtitles while playing the video. Can use the up or down button to select one of subtitle languages available on the DVD. Press once and it returns to the main menu from the photo, video or music section. Press twice and it returns to the storage unit menu (if there is more than one). Change the selected Media: from All, Video, photos, Audio. Up Down Left Right Enter Stop Pause/Play Previous Next Rewind Forward Increase the volume Decrease the volume Change repeat play mode Plays photos in continuous mode By selecting DVD button, you enter into DVD navigation functions ANGLE SUB-T VIDEO AUDIO MENU OPTION ENTER VOL+ VOLREPEAT Slideshow DVD play -4- 5. PRODUCT USE 5. 1 Device Connection Connect the device as indicated in the pictures, switch on the power and follow these steps: 1. AV(CVBS) mode: press INPUT CHOICE key of the TV, and turn to AV INPUT MODE. If no image appears, press VIDEO key of the Media player remote control and wait for a few seconds until it turns to CVBS mode, then menu appears on TV. AV OUTPUT MODE 2. YPbPr output mode: choose YPbPr as input mode for TV. Press VIDEO key of Media player remote control to choose YPbPr OUT mode, and menu appears on TV. AUDIO LEFT(White) AUDIO RIGHT(Red) VIDEO Y(Green) VIDEO Pb(Blue) VIDEO Pr(Red) YPbPr OUTPUT MODE -5- 3. HDMI output mode: press VIDEO button on remote control of media player to choose the HDMI output mode. The menu then appears on the TV. HDMI Output 4. Coaxial output mode: Connect the product to external device with coaxial input through coaxial cable. Coaxial output connection 5. 2 USB Host usage After plug in an USB device, a menu listed all of storage equipment is displayed. Press KEY to choose the storage equipment. Press the ENTER KEY to enter its main menu. Warning: Some video playback can slow down if the bitrate is too high (over 7MB / s), indeed, data transfer is too high and limited by the USB output. 5. 3 Functioning Main menu for storage equipment: when there are two or more partitions in media player of the HD, or when using external storage equipment, the start-up window will appear as follow: Press the up and down key to choose the equipment or the partition, and press the enter key to enter menu. 5. 4 Watching photos: Select PHOTO icon with the [Menu] button from remote control, then press the ENTER key into the photo browse mode. Press the direction key to choose the picture and press ENTER key to begin playing normally. [. . . ] AIt's possible there is a missing USB driver. Please reinstall your operation system, and search for the driver, or, use Internet to search for the USB2. 0 driver procedure. Q: My file slow down when I read it with the USB Host. A: Some files require a lot of resources, reading files with a too high bitrate are limited by the USB connection and data transfer. [. . . ]