User manual MEMUP MEDIA DISK TWX

[. . . ] >>> Disassembly / Modification Do not attempt to disassemble or modify any part of TWX. Any product modification may void the warranty. >>> Load Do not place any heavy object on the top of the TWX. >>> Chemicals Do not clean product using chemicals cleaners. [. . . ] Select appropriate video input mode on TV and output on TWX through remote control. Connection with 2 CH of Normal TV Connect left (white) and right (red) sound output to appropriate terminal of your TV or Hi-fi Connection with Coaxial output Connect to multi channel decoder / amplifier with coaxial input to enjoy 5. 1 CH quality sound. -6- 7 8 ¡ ¡ Connection with Optical output Connect to multi channel decoder / amplifier with optical input to enjoy 5. 1 quality sound. Connection with computer Connect TWX with computer to transfer datas through USB cable. -7- 2. NETWORK BASED DATA SHARING WITH PC LAN Cable connection between TWX and PC 2. 1 Connection to PC Use cross or direct cable. 2. 2 HUB Connection For hub or internet router connection, use direct cable. Note: To be connected to TWX, computer should be equipped with a 10/100Mbps LAN card. Whether cross or direct LAN cable can be used for this connection. Network-based Data Sharing with PC After LAN cable is connected, according to your system environment, set up windows network as follows. To establish network communication between TWX and your computer, two requirements should be satisfied: 1) Folder sharing and security setup 2) Using same IP address band and Subnet Mask -8- 2. 3 Data sharing Setup for Windows XP 1. Select folder you want to share and select "Sharing and security" with right mouse button. 2. Check "Sharing this folder on the network" and type "Share Name". "Share Name" should be less than 12 characters. 3. If folder is shared, you will see a hand mark on folder icon. Go to "Control Panel ­Administrative Tools ­Computer Management ­Local Users and Group" and among displayed items, double­click "Guest" item. -9- WARNING!· Permission setting is only required for Windows XP Pro users. If you are an XP home user, go directly to step "6". · If you cannot see "Administrative Tools", click on "Switch to Classic view" on left corner. 5. After checking "User cannot change password" and "Password never expires", keep the other checkboxes unchecked. Go to "Control Panel--Network Connections". Select "Local Area Connections". Select "Properties" using right mouse button. WARNING !· If you cannot see any "Network connections", click on "Switch to Classic View" on the upper left corner · If there are more than two "Local Area Connections", select the LAN card connected to TWX. - 10 - 7. Among displayed items, double-click "Internet Protocol (TCP/IP)". After checking "Specify an IP address" enter your IP address and subnet mask. Ex: IP address: 192. 168. 1. 3 Subnet Mask: 255. 255. 255. 0. [. . . ] While playing movie, there is no audio output. In SETUP menu, check if audio output mode is properly set. Display different TV output to check if none are available 4. Please refer to Network settings part and follow step by step It could depend on your Operating system, for other OS, please check our FAQ in www. memup. com Make sure your personal firewall is deactivated or correctly set to function with TWX Make sure your network cable are correctly plugged Shared files must be activated in your domestic network 5. [. . . ]