User manual MERIDIAN DSP3200

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] · To avoid overheating leave at least 10cm around the equipment to ensure sufficient ventilation. · Do not position the unit in direct sunlight, near heat sources such as a radiator, or directly on top of heat producing equipment, such as a power amplifier. · To avoid interference do not position the unit near strong electrical or magnetic radiation, such as near a power amplifier. Radio interference FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations. EEC: This product has been designed and type-tested to comply with the limits set out in EN55013 and EN55020. · · · · Copyright Meridian Audio Ltd Latham Road Huntingdon Cambridgeshire PE29 6YE England Copyright © 2010 Meridian Audio Ltd. Visit us on the Web: http://www. meridian-audio. com Part no: DSP3200 (P88394) This guide was produced by: Human-Computer Interface Ltd, http://www. interface. co. uk/ WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. This apparatus has been designed with Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding pin). This apparatus does not include a power switch. The apparatus may be isolated from mains power either by unplugging the power connector from the rear of the unit, or by unplugging the connector at the opposing end of the power cord or cable from its supply outlet. As a result, either or both of these connectors should remain accessible CAUTION: This DSP3200 for use only with the Meridian DSP3200 Stand, part number SP5543. Use with other stands is capable of resulting in instability causing possible injury. EN DSP3200 User Guide 3 Unpacking The DSP3200 is supplied with the following accessories: · Power cord. If either of these items are missing please contact your dealer. NOTE: You should retain the packaging in case you need to transport the units. Connections The following diagram gives details of the connections on the base of the speaker: SpeakerLink input output Power Digital connections Use this connection SpeakerLink input To connect to this The SpeakerLink output of a Meridian Sooloos component, Digital Surround Controller, or Audio Core 200. The Speakerlink input of a second DSP3200 digital speaker, when daisychaining the speakers. SpeakerLink output SpeakerLink L/C R Digital Channel Selector Power Inlet Fuse Input Output Miscellaneous Switch Digital Channel Selector Description Set to L/C to use the speaker as a left or centre channel speaker. [. . . ] You can browse and control music on the system using the Sooloos application on an iPad, iPhone, or iPod Touch, or the Control:PC/Control:Mac application on a computer. · Connect the Network socket on the Media Core 200 to one of the LAN network connections on your Router, using a CAT5 cable. · Make sure the WAN/Internet port on the Router is connected to the rest of your network, or to your Cable/DSL Modem. · Connect the SpeakerLink output on the Media Core 200 to the master DSP3200 SpeakerLink input, using a Meridian SpeakerLink lead. [. . . ]