Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual METABO BS 14.4V. We hope that this METABO BS 14.4V user guide will be useful to you.
Lastmanuals help download the user guide METABO BS 14.4V.
Detailed instructions for use are in the User's Guide.
[. . . ] - Where the use of a dust extraction device is possible it shall be used. - The work place must be well ventilated. - The use of a dust mask of filter class P2 is recommended. Follow national requirements for the materials you want to work with. [. . . ] Troubleshooting
The machine's multifunctional monitoring system If the machine switches off automatically, the machine electronics have activated automatic protection mode. A warning signal sounds (continuous beeping). The beeping stops after a maximum of 30 seconds or when the trigger (10) is released. A, B (The electronics protect the battery pack against damage through total discharge). If one LED is flashing (7), the battery pack is almost flat. If necessary, press the (6) button and check the LEDs (7) to see the charge level. If the battery pack is almost flat, it must be recharged. Long continuous overloading of the machine will activate the temperature cut-out. Leave the machine or battery pack to cool. Note: If the battery pack feels very warm, the pack will cool more quickly in your "AIR COOLED" charger. Note: The machine will cool more quickly if you operate it at idling speed. If the current is too high (for example, if the machine seizes continuously for long periods), the machine switches off. Switch off the machine at the trigger (10). Try to prevent the machine from seizing. 1
Charge the battery pack before use. if performance diminishes , recharge the battery pack. The ideal storage temperature is between 10 °C and 30 °C. E Do not set the switch (3) unless the motor has stopped completely!The speed can be changed by pressing in the trigger. switching off: release the trigger (10). Note: The noise that the machine makes when it switches off is due to the design (quick stop) and has no influence on the function or the service life of the machine. For a complete range of accessories, see www. [. . . ] Impact rate m = Weight (with smallest battery pack) G = Spindle thread D max = Chuck clamping range Vibration total value (vector sum of three directions) determined in accordance with EN 60745: ah, ID = Vibration emission value (impact drilling into concrete) ah, D = Vibration emission value (drilling into metal) ah, S = Vibration emission level (screwing without impact) Kh, . = Uncertainty (vibration) The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It is also suitable for a provisional estimate of the vibratory load. The specified vibration level applies to the main applications of the power tool. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE METABO BS 14.4V
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual METABO BS 14.4V will begin.
