User manual METABO STE 100 PLUS BROCHURE

[. . . ] SAWS THE NUMBER ONE CHOICE FOR THE PROFFESSIONAL The Metabo circular saw range is built for outright precision and quality. Built tough for the demands of the professional, machines with long life motors, safety clutches, large rip fences, solid all metal gear housings, riving knifes and quick cut blades fitted as standard are available within the range. [. . . ] SPECIAL-PURPOSE MACHINES COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY WOOD-PROCESSING TECHNOLOGY GARDEN Order no. 6. 28030 6. 28031 6. 28032 6. 28033 6. 28034 6. 28035 6. 28040 6. 28044 Order no. 6. 28000 6. 28070 6. 28071 6. 28072 6. 28073 6. 28074 6. 28075 6. 28076 6. 28077 6. 28078 6. 28079 6. 28080 6. 28085 6. 28086 SYSTEMATIC ORGANISATION Flat top tooth Alternately bevel-ground tips Flat top tooth Alternately bevel-ground tips Alternately bevel-ground tips Flat/trapezoid tooth Flat top tooth Flat/trapezoid tooth Alternately bevel-ground tips Ks 0852 S KS 54 / KSE 55 Plus Ks 1155 S Ks 1266 S / Ks 1468 S KS 66 / KSE 68 Plus KS 66 / KSE 68 Plus Ks E 1678 S-Signal KS 85 KS 85 6. 28001 6. 28002 6. 28003 6. 28004 6. 28005 6. 280061) 6. 28007 6. 280101) 6. 280111) 1) exceptionally nail-proof saw blade Carbide-tipped circular saw blades "precision cut" · Very wide range of uses in woodworking · For very good, clean cut results with straight or cross cutting in softwood and hardwood · Well suited for solid and plywoods, chipboards untreated, coated or veneered, MDF, composite materials · The circular saw must have a high performance motor NEW Diameter mm 160 160 167 167 190 190 210 230 Cutting width mm 1, 6 2, 2 2, 4 2, 4 2, 6 2, 2 2, 6 2, 6 Steel blade thickness mm 1, 1 1, 4 1, 6 1, 6 1, 8 1, 4 1, 8 1, 8 Bore-Ø mm 20 20 20 20 20 30 30 30 Number of teeth 24 24 20 40 48 48 56 56 Tooth form Rake angle 22° 20° 20° 10° 10° 15° 10° 15° suitable for Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips KSAP 18 KS 54 Ks 1155 S Ks 1155 S Ks 1266 S/ Ks 1468 S KS 66 / KSE 68 Plus Ks E 1678 S-Signal KS 85 Carbide-tipped circular saw blades "multi cut" · Universal use for demanding materials · For the highest standards in cutting quality, e. g. laminate, plastic, aluminium, copper and bronze materials · Ideally suited for many applications in interior work · Perfect cutting results, also when crosscutting, in solid wood, coarse, coated or veneered chipboards, MDF · The circular saw must have a very high performance motor · Requires steady and relatively slow feed rates NEW Diameter mm 150 152 160 160 160 167 190 190 190 210 210 210 230 230 Cutting width mm 2, 4 2, 4 2, 2 2, 2 2, 2 2, 4 2, 2 2, 6 2, 2 2, 6 2, 8 2, 8 2, 6 2, 6 Steel blade thickness mm 1, 6 1, 6 1, 4 1, 4 1, 4 1, 6 1, 4 1, 8 1, 4 1, 8 2, 0 2, 0 1, 8 1, 8 Bore-Ø mm 20 20 20 20 20 20 30 20 30 30 30 30 30 30 Number of teeth 36 54 30 42 54 42 36 54 56 54 60 60 60 60 Tooth form Rake angle 10° 5° neg. 5° 8° suitable for Alternately bevel-ground tips Flat/trapezoid tooth Alternately bevel-ground tips Alternately bevel-ground tips Flat/trapezoid tooth Flat/trapezoid tooth Alternately bevel-ground tips Flat/trapezoid tooth Flat/trapezoid tooth Flat/trapezoid tooth Alternately bevel-ground tips Flat/trapezoid tooth Alternately bevel-ground tips Flat/trapezoid tooth Ks 0852 S Ks 0852 S KS 54 / KSE 55 Plus KS 54 / KSE 55 Plus KS 54 / KSE 55 Plus Ks 1155 S KS 66 / KSE 68 Plus Ks 1266 S / Ks 1468 S KS 66 / KSE 68 Plus Ks E 1678 S-Signal Ks E 1678 S-Signal Ks E 1678 S-Signal KS 85 KS 85 | 193 SAWS JIG SAWS OTHERS SOMETIMES JUST DON`T CUT IT. Metabo offer a solid range of Jigsaws from entry level through to top end professional machines. Backed up with an extensive range of accessories these machines are capable of cutting a whole host of materials from wood, metals, plastics, brick and breeze block to fiber glass and rubber. Jigsaw blade assortment 1 For wood and metal HCS saw blades/ HSS saw blade Consisting of 1 saw blade each: 6. 23634, 6. 23633, 6. 23637 Material suitability: Wood, Metal Number of parts: 3 Jigsaw blade assortment 2 For wood, metal and plastic HCS saw blades/ HSS saw blade Consisting of 1 saw blade each: 6. 23633, 6. 23635, 6. 23632, 6. 23631 und 6. 23637 Material suitability: Wood, Plastics, Metal Number of parts: 5 Jigsaw blade assortment 3 For wood, metal and plastic HCS saw blades/ HSS saw blades Consisting of 2 jigsaw blades each: 6. 23634, 6. 23633, 6. 23646, 6. 23637, 6. 23638 Material suitability: Wood, Metal, Plastics Number of parts: 10 Jigsaw blade assortment 4 For wood HCS saw blades Consisting of 10 saw blades 6. 23633 and 6. 23635 and 5 saw blades 6. 23649 Material suitability: Wood Number of parts: 25 6. 23968 NEW Set of two clamps For fixing the precision guide rail on the workpiece or work table Jigsaw bench mounting plate With clamp for fixing on the workbench Table-top dimensions: 183 x 255 mm Flexo 500 universal table For the stationary use of Metabo jig saws, routers and circular saws (when using appropriate accessories) With foldable stand and height adjustment Sturdy steel construction and a large table top made from continuous strand casting Table width extension Increases the supporting surface; ideal for large boards Enables cuts with parallel guide of up to 610 mm Height adjustable Suitable for: UK 333, UK 290, Flexo 500 Length: 674 mm Width: 501 mm Lubricating stick For lubricating the jigsaw blades when sawing metal 3 chip break guard plates Suitable for: ST 50 Pendix, STE 70, STE 80 Quick 3 chip break guard plates Suitable for: STE 100 Plus, STE 135, STE 135 Plus, STEB 135, STEB 135 Plus Suction hose With connector Ø 58 mm for bayonet fitting and rubber connector (internal Ø 30 mm, outside Ø 35 mm) Hose length: 3, 5 m Suction hose Ø: 27 mm Carry case For ST 50 Pendix, STE 70, STE 80 Quick 6. 31031 Connector For joining together two precision guide rails Order no. 6. 31211 SAWS 0910064304 GB NEW 6. 23645 6. 23600 NEW 0910064401 GB 6. 23698 NEW 6. 23443 WOOD-PROCESSING TECHNOLOGY COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY 6. 25450 6. 25446 6. 24639 6. 31208 Accessories Order no. Guard plate For fitting on the base plate of jigsaws. [. . . ] SAWS Milled, Crossed HSS 74 1, 4 - 2, 6 mm, progressiv T 123 X 5 25 6. 23676 6. 23620 SPECIAL-PURPOSE MACHINES COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY WOOD-PROCESSING TECHNOLOGY GARDEN SYSTEMATIC ORGANISATION Milled, Crossed HSS 74 3, 0 mm T 127 D 5 25 100 6. 23639 6. 23622 6. 23709 Milled, Crossed HSS 74 3, 0 mm T 227 D 5 6. 23648 Milled, Crossed BiM 75 3, 0 mm T 127 DF 5 6. 23974 Ground carbide 57 1, 1 mm T 118 AHM 3 6. 23662 Ground carbide 57 1, 4 mm T 118 EHM 3 6. 23663 Ground carbide 91 3, 3 mm T 301 CHM 3 6. 23687 Ground carbide 74 4, 3 mm T 141 HM 1 6. 23652 Ground carbide 106 4, 3 mm T 341 HM 1 3 6. 23688 6. 23671 Clearance angle ground, HSS Teeth ground 74 2, 0 mm T 101 A 5 6. 23640 Knife-blade ground, Straight HCS 74 T 113 A 5 6. 23641 Knife-blade ground, Crimped HCS 126 T 313 AW 3 6. 23684 Coarse Carbide, coated 76 T 130 Riff 1 6. 23657 Fine Carbide, coated 76 T 150 Riff 1 6. 23658 FOR METAL, "PIONEER" SERIES Sheet steel, 1. 5-10 mm, Non-ferrous metals up to 30 mm FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Plastics, For quick cuts Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Especially for curved cuts Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Plastics, For quick cuts FOR STAINLESS STEEL, "EXPERT" SERIES Stainless steel sheets (Inox) 1-2 mm, Non-ferrous metals Stainless steel sheets (Inox) 2-4 mm, Non-ferrous metals FOR PLASTICS, "EXPERT" SERIES Fibre glass reinforced plastics, Corian 4-60 mm FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES Gypsum plaster, Cement fibre boards 5-50 mm, Fibre glass reinforced plastics, 5-20 mm, Gypsum plaster, Cement fibre boards 5-80 mm, Fibre glass reinforced plastics, 5-50 mm, FOR PLEXIGLAS, "EXPERT" SERIES Plexiglas, Polycarbonate 2-20 mm, Non-ferrous metals 2 -10 mm FOR SOFT MATERIALS, "EXPERT" SERIES Expanded polystyrene, Cardboard, Leather, Rubber, Carpet up to 50 mm Expanded polystyrene, Cardboard, Leather, Rubber, Carpet up to 50 mm FOR CERAMIC MATERIALS, "EXPERT" SERIES Ceramic, Glass, Fibre glass reinforced plastics, Cast iron Ceramic, Glass, Fibre glass reinforced plastics, Cast iron | 203 JIG SAW BLADES Jig saw blades with Fein shank Suitable for FEIN jig saws Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-40 mm Clearance angle ground, Teeth ground HCS 60 3, 0 mm F1C 5 6. 23992 Hard wood, Soft wood, Wood-core plywood, Fibre boards 10-40 mm Clearance angle ground, Teeth ground HCS 60 4, 0 mm F1D 5 6. 23993 FOR METAL, "CLASSIC" SERIES Sheet steel, 0. 5-1. 5 mm Milled, Crimped HSS 50 0, 7 mm F 18 G 5 6. 23996 FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm Milled, Crimped BiM 60 1, 2 mm F 18 AF 5 6. 23994 Sheet steel, 2. 5-6 mm, Plastics Milled, Crimped BiM 60 2, 0 mm F 18 BF 5 6. 23995 FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous metals 3-15 mm, Pipes up to 30 mm, Profiles up to 30 mm Milled, Crossed BiM 75 3, 0 mm F 127 DF 5 6. 23997 Jig saw blades with universal shank Suitable for Black & Decker, Skil, Kress and others Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. FOR WOOD, "CLASSIC" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For clean cuts Milled, Crossed HCS 74 3, 0 mm U 111 C 5 6. 23945 FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm Ground, Crossed HCS 82 4, 0 mm U 144 D 5 6. 23944 Hard wood, Soft wood, Plywood, Coated boards, 1. 5-15 mm, Especially for curved cuts Clearance angle ground, Tapered HCS 52 1, 3 mm U 1 AO 5 6. 23936 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-45 mm, For clean cuts Clearance angle ground, Teeth ground HCS 82 2, 5 mm U 101 B 5 6. 23943 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-45 mm, For clean cuts Clearance angle ground, Teeth ground HCS 82 4, 0 mm U 101 D 5 6. 23942 204 | JIG SAW BLADES Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. SAWS 5 6. 23904 5 6. 23905 5 6. 23906 5 6. 23938 5 6. 23941 WOOD-PROCESSING TECHNOLOGY COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY 5 6. 23940 5 6. 23907 5 6. 23937 5 6. 23909 5 6. 23939 FOR WOOD, "PROFESSIONAL" SERIES, BIM Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For quick cuts Ground, Crossed BiM 74 4, 0 mm U 144 DF Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 3-30 mm, Coated boards, For clean cuts Clearance angle ground, Teeth ground BiM 82 2, 5 mm U 101 BF FOR WOOD, "PIONEER" SERIES FOR WOOD AND METAL, "PIONEER" SERIES Wood, Wood with nails, Metal, Non-ferrous metals, Plastics Milled, Crossed BiM 107 2, 4 - 5, 0 mm, progressiv U 345 XF FOR METAL, "CLASSIC" SERIES GARDEN Sheet steel, 0. 5-1. 5 mm Milled, Crimped HSS 52 0, 7 mm U 118 G Sheet steel, 1-3 mm Milled, Crimped HSS 52 1, 2 mm U 118 A Sheet steel, 2. 5-6 mm Milled, Crimped HSS 52 2, 0 mm U 118 B FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm Milled, Crimped BiM 52 1, 2 mm U 118 AF Sheet steel, 2. 5-6 mm Milled, Crimped BiM 74 2, 0 mm U 118 BF FOR METAL, "PIONEER" SERIES Sheet steel, 1. 5-10 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 74 1, 2 - 2, 6 mm, progressiv U 123 X FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous metals 3-15 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 74 3, 0 mm U 127 D | 205 SYSTEMATIC ORGANISATION Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 2-65 mm, For quick cuts Clearance angle ground, Teeth ground HCS 90 2, 0-3, 0 mm, progressiv U 234 X 5 6. 23903 SPECIAL-PURPOSE MACHINES JIG SAW BLADES Jig saw blades with Makita shank Suitable for Makita jigsaws Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. FOR WOOD, "CLASSIC" SERIES Soft wood, Plywood, Chipboards, Wood-core plywood, Fibre boards 3-15 mm, Especially for curved cuts Milled, Crossed HCS 62 2, 5 mm MA 119 HO 5 6. 23958 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For rough cuts Milled, Crossed HCS 62 3, 0 mm MA 111 C 5 6. 23955 FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For quick cuts Ground, Milled HCS 82 3, 0 mm MA 144 CD 5 6. 23919 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Plastics, 3-30 mm, For clean cuts Clearance angle ground, Teeth ground HCS 62 2, 7 mm MA 101 BC 5 6. 23959 FOR WOOD, "PIONEER" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 2-65 mm, For quick cuts, For clean cuts Clearance angle ground, Teeth ground HCS 92 progressiv, 2, 0-3, 0 mm MA 234 X 5 6. 23911 FOR WOOD AND METAL, "PIONEER" SERIES Wood, up to 65 mm, Wood with nails, Metal sheets, Pipes, Aluminium, Plastics, 3-10 mm Milled, Crossed BiM 102 progressiv, 2, 5-5, 0 mm MA 345 XF 5 6. 23912 FOR METAL, "CLASSIC" SERIES Sheet steel, 1-3 mm Milled, Crimped HSS 62 1, 0 mm MA 118 A 5 6. 23957 Sheet steel, 2. 5-6 mm, Milled, Crimped HSS 62 1, 8 mm MA 118 B 5 6. 23956 FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm Milled, Crimped BiM 62 1, 0 mm MA 118 AF 5 6. 23916 Sheet steel, 2. 5-6 mm Milled, Crimped BiM 62 1, 8 mm MA 118 BF 5 6. 23917 FOR METAL, "PIONEER" SERIES Sheet steel, 1-10 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 77 progressiv, 1, 0-2, 6 mm MA 123 X 5 6. 23914 FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous metals 3 -15 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 62 3, 0 mm MA 127 D 5 6. 23918 206 | [. . . ]