Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual METRONIC POINTEUR SATELLITE. We hope that this METRONIC POINTEUR SATELLITE user guide will be useful to you.
Lastmanuals help download the user guide METRONIC POINTEUR SATELLITE.
Manual abstract: user guide METRONIC POINTEUR SATELLITE
Detailed instructions for use are in the User's Guide.
[. . . ] 1 With the satellite receiver unplugged from the mains, connect the LNB (Low Noise Block downconverter, hereinafter LNB) to the input marked "TO LNB" of the satellite pointer with a cable around 1m in length. 2 - Slowly turn the button (dB) up to the left end stop (counter clockwise direction) 3 Connect the cable from the satellite receiver to the pointer input marked "TO REC". [. . . ] The level indicators (needle and sound) should not go above those just heard. 9 - Incline the receiver dish by directing the upper section forward around two degrees. (around 2cm on the height of the receiver dish) and restart the same scanning process. 10 Proceed as described in steps of two degrees until the indicators. Increase: the needle reaches the maximum point to the right and the sound reaches its peak volume. 11 Reduce the sensitivity by turning the button (dB) very slowly to the left and ensuring the needle returns once again between the figures of 3 and 5. Work on the calibration by restarting from point 9. 12 - The optimal pointing position is when it is no longer possible to make the indicators increase by pushing the receiver dish delicately to the right or left as well as up or down. 13 Check on the TV to ensure that the channel selected in point 5 is being properly received. 14 - Start securing the screws of the receiver dish and verify one last time that the reading value of the pointer has not gone down during this process. 15 Complete the securing of the screws. 16 When the pointing of the receiver dish is complete, it is sometimes useful to refine the polarisation of the LNB head, particularly for satellites far away from the south position. [. . . ] - The pointer is set up with a factory default setting with utmost sensitivity; and if used with a high gain LNB, you may be unable to reduce the sensitivity with the button as indicated in point 11. In this case, the cable connecting the LNB and the pointer must be replaced with one of around 10m in length and the adjustment process from point 7 must be recommenced. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE METRONIC POINTEUR SATELLITE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual METRONIC POINTEUR SATELLITE will begin.
