User manual METRONIC REPLAYBOX

[. . . ] User manual Digital satellite receiver Reference: 441550 5000 Channels / Parental Control 2 Scarts / DiSEqC 1. 2 / Digital PVR MET519 CAUTION The interior of your receiver (Re)playBox contains some components that are under high tension, never open the appliance, even after unplugging the power supply. In general, electrical appliances are not connected to earth, you can then get some electrical discharges (which are not risky) when you touch 2 appliances at the same time (or an appliance and an aerial cable). Our advice is to connect the equipment after all the sockets connections have been made. To clean the receiver or its remote control, do not use any solvent or detergent. [. . . ] · On the row polarization, choose horizontal or vertical. · Go onto the row follow and then press on OK to access the second page. · On the row frequency, enter the 5 figures of the satellite frequency. · On the row SR, enter the 5 figures of its debit symbol (SR). At this stage, if the quality line has not gone up, that means that the numbers are false or out of date. Check back into the magazines or websites. · On the row research network, leave deactivated. · On the row programs type, choose all with the 34 keys. The option FTA (Free To Air) allows you to enter in memory the Free channels. The crypted option allows you to put in memory only the pay per view channels. · Go onto the row start the research and type OK. The research start and the channel list found appears. On the page that display the channel found, the quality line is at the bottom, and the blue line at the top show you the progression. When the line is totally blue, that means that the research is finished. If no channel appears, and the reception quality is good, that means that the channels are already in memory. 22 B Satellite update · · · · Go into Menu / Search channels / automatic search With the arrows 56, select the satellite you want to update. Press on OK, a selection sign appears near the name. Press on the red key (audio) to launch the automatic update. At this stage, if the quality is under 30, that means the parameters are false. · On the row FEC, leave automatic · On the row type search, choose FTA (channel in clear only) · On the row network search, choose start · Press on OK to launch the research. A window shows you the number of TV channel and radios have been found. · Press on EXIT when the search is finished. On the page which display the channel found, the quality line is at the bottom, and the blue line at the top show you the progression. When the line is totally blue, that means that the research is finished. If no channel appears, and the reception quality is good, that means that the channels are already in memory. Note: before launching the search, you can select several satellites. In that case, as soon as the search on the first satellite is finished, the search on the second satellite starts and so on. [. . . ] · Which cable length did you use ?5m 10 m 15 m 20 m 30 m 40 m plus Other remarks or suggestions : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]