User manual METRONIC TELECOMMANDE UNIVERSELLE ZAP 6 QUICK GUIDE

[. . . ] Model 495336 pozwala sterowa a 6 rónymi urzdzeniami : telewizorem (TV), odbiornikiem satelitarnym, (SAT), wideo (VCR), odtwarzaczem DVD, wie Hi-Fi, a take adaptatorem cyfrowej platformy naziemnej (TNT). We are confident you will be fully satisfied with this product. The 495 336 model allows you to control up to 6 appliances: TV, VCR, satellite receiver, DVD player, stereo system as well as digital receiver. [. . . ] 2 ­ Look up in the following pages (TV section) the codes that correspond to the brand of your TV (i. For AEG, you should try the code 0540, then 1423 if the first code does not work, and finally 0513 if none of the first two codes work). 3 ­ Press the SET and TV keys together for a few seconds until the light switches on. If you wait too long before pressing another key, the remote will go into standby and the light will switch off. You should then start again from step 3. 4 ­ Enter one of the 4-digit Brand codes. After each digit, the light will briefly switch off. It will switch off for good after you have entered the 4th digit. If the light blinks twice and then stays on, try the next code. 5 ­ Point the remote towards your TV and try using the main features (changing channels, adjusting sound. ) 6 ­ If the remote does not control the TV properly, try the set up again (from step 3) with the next Brand code. if the remote controls the TV correctly , then the set up is over. If the remote does not work properly with any code, you should try an automatic search. b ­ Automatic Search 1 ­ Switch on your TV. [. . . ] 5 ­ As your TV is now switched off, switch it on again using the original remote or with the front keys. 6 - Point the remote towards your TV and try using the main features (changing channels, adjusting sound. ) If the remote does not control the TV properly, try the automatic set up again (from step 2). [. . . ]