User manual METRONIC TELECOMMANDE UNIVERSELLE ZAP3 SKIN EVO3

[. . . ] Remote control leaves the programming mode and the light goes off. Then, try again the procedure from step 3. 4 - Enters one of Brands codes with 3 digit. [. . . ] As the operation may last up to fifteen minutes, take place comfortably in front of your television. 2 - Press TV key, the light lights on quickly. 3 - Press and hold the SET key on during few seconds, the light blinks. Then, release the SET key, you have just entered in the automatic search mode. 4 - As soon as the television switches off, press SET key. 5 - Then, switch on the television with the original remote control or with the front keys. 6 - Direct the remote control towards the television and try the main functions (channel change, volume control, . If the remote control does not control correctly the television, restart the automatic search from stage 2. if the remote control controls correctly the television , the installation is over. To change the batteries : When the operating distance of the remote control decreases, or that the remote control presents malfunctions, it is probably because the batteries must be changed. For economic and environmental reasons, we invite you to use rechargeable batteries. Thank you for choosing a Metronic universal remote control and we hope, you will be satisfied with it. This model enables to control 3 appliances: TV, Satellite receiver (SAT) , and auxiliary appliance (AUX) which could be a Video Cassette Recorder, DVB-T receiver, . 5V AAA (not included), you will install your remote control for each appliance. [. . . ] While holding the SET key, press the TV key, the light lights on. Release SET and TV key, the light remains on. If you wait too much time without pressing on a key, the [. . . ]