User manual MGA ENTERTAINMENT BRATZ AMFM HANDBAG CD BOOM BOX 6 7

[. . . ] - Be sure to play with your HULKTM VR 3DTM game in a safe area. Do not attempt to walk and wear your - headset over your eyes at the same time to reduce the risk of possible injury. + _ + + _ JOYSTICK 1. Unscrew with a Phillips head screwdriver & remove the battery cover on the joystick. Insert 3 AAA (1. 5V) Alkaline batteries in the proper direction, as indicated in the battery compartment. [. . . ] - Connect the earphones adapter into the earphone jack at the bottom of headset (FIG. Place the "earbud" earphones securely and comfortably into your ears. - NOTE: Your headset is designed to work with most headset earphones!Simply, connect your own personal headphones into the earphone jack. - Place the headset unit onto your head, using the adjustable features (to tighten or release the straps) for a secure and comfortable fit. 4) - Place your eyes close to the lenses (as close as possible) and allow your eyes to adjust to the 3-D images in the viewpiece. - Look for the 3D effect from the LCD screen. PLUG IN THE EARPHONES Figure 3 TM & © 2003 MGA Entertainment, Inc. ® All Rights Reserved. 16730 Schoenborn Street North Hills, CA 91343 USA (800) 222-4685 Printed in China. JOYSTICK Set Up - Switch the power to "ON". 5) - Hold the joystick in a comfortable position in your hand(s). - The Power Indicator light on the joystick will turn on only when you press the Fire/Enter button or push the joystick pad left or right. - Push "FIRE/ENTER" to start the game (you will hear an audio cue that the game is about to begin). (see Fig 5, 6) NOTE:Your headset will also automatically shut off after 2 minutes of non-play. NOTE: Make sure to keep your HULKTM VR 3DTM headset right-side up (so that the POWER ON/OFF button is on top). If you place your headset down onto the POWER ON/OFF button, you may inadvertently turn the unit back ON and drain the batteries. e. d. a. Reset HULKTM f. Figure 7 Press the RESET button if the game does not work properly. This will reset the game & the High Score record. (see Fig 6) TROUBLE SHOOTING If There is No Display in the Headset: - Make sure you have turned ON the unit. - Press RESET button to restart the unit. - Check that the batteries are inserted properly. - Replace the old batteries with new alkaline batteries. PLAYING HULK TM VR 3D TM You are the HULKô!The object of the game is to earn points by throwing bricks to destroy the tanks and the chopper before they destroy you!Mode 1 is the easiest; Mode 2 is more challenging; and Mode 3 is the most difficult. [. . . ] - Replace the old batteries with new alkaline batteries. - If lighting/brightness is considerably low or yellowish, the game display may look dim. - Therefore it is best to play in white light or natural light with enough brightness. - You can change the environment to get a better effect. Your HULKTM VR 3DTM Game Display utilizes the light that is outside of the your headset unit. [. . . ]